Read this first
Theft-Deterrent System (Some Models)
If the theft deterrent system detects an inappropriate entry into the vehicle or the intrusion sensor detects movement in the vehicle which could result in the vehicle (with the intrusion sensor) or its contents being stolen, the alarm alerts the surrounding area of an abnormality by sounding the siren/horn and flashing the hazard warning lights.
The system will not function unless it's properly armed. So when you leave the vehicle, follow the arming procedure correctly.
Intrusion sensor (Some Models)
The intrusion sensor uses ultrasonic waves to detect movement inside the vehicle and to raise an alert of an intrusion into the vehicle.
The intrusion sensor detects certain kinds of movement inside the vehicle, however, it may also respond to phenomenon outside the vehicle such as vibrations, loud noise, wind, and air currents.
In order for the intrusion sensor to operate appropriately, be aware of the following:
-
Do not hang clothing or objects from a head restraint or a coat hook.
-
Return the extension sunvisors to their original positions.
-
Do not blind the intrusion sensor by covering it or placing objects over it.
-
Do not allow the intrusion sensor to get soiled or wipe it with a liquid.
-
Do not shock or cause an impact to the intrusion sensor or the intrusion sensor bezel.
-
Do not install seats or seat covers that are not Mazda genuine products.
-
To prevent obstruction of intrusion sensor, do not place objects or cargo near the intrusion sensor that are higher than the head restraints.
