Meters and Gauges
Active Driving Display (Some Models)
Warning/Indicator Lights

Trip Computer and INFO Switch (Some Models)

The following information can be selected by pressing the up or down part of the INFO switch with the ignition switched ON.

  • Approximate distance you can travel on the available fuel

  • Average fuel economy

  • Current fuel economy

  • Average vehicle speed

  • Vehicle speed alarm (Some Models)

If you have any problems with your trip computer, consult an expert repairer, we recommend an Authorised Mazda Repairer.

Distance-to-empty mode

This mode displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

 

The distance-to-empty will be calculated and displayed every second.

(European model)

(Except European model)

 


  • Even though the distance-to-empty display may indicate a sufficient amount of remaining driving distance before refuelling is required, refuel as soon as possible if the fuel level is very low or the low fuel warning light illuminates.

  • The display may not change unless you add more than approximately 9 L (2.3 US gal, 1.9 Imp gal) of fuel.

  • The distance-to-empty is the approximate remaining distance the vehicle can be driven until all the graduation marks in the fuel gauge (indicating the remaining fuel supply) disappear.

  • If there is no past fuel economy information such as after first purchasing your vehicle or the information is deleted when the battery leads are disconnected, the actual distance-to empty/range may differ from the amount indicated.

Close Note
View Note

Average fuel economy mode

This mode displays the average fuel economy by calculating the total fuel consumption and the total travelled distance since purchasing the vehicle, re-connecting the battery after disconnection, or resetting the data. The average fuel economy is calculated and displayed every minute.

(European model)

(Except European model)

To clear the data being displayed, press the INFO button for more than 1.5 seconds.

After pressing the INFO button, - - - L/100 km (- - - mpg) will be displayed for about 1 minute before the fuel economy is recalculated and displayed.

Current fuel economy mode

This mode displays the current fuel economy by calculating the amount of fuel consumption and the distance travelled.

 

Current fuel economy will be calculated and displayed every 2 seconds.

(European model)

(Except European model)

When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.

Average vehicle speed mode

This mode displays the average vehicle speed by calculating the distance and the time travelled since connecting the battery or resetting the data.

Average vehicle speed will be calculated and displayed every 10 seconds.

(European model)

(Except European model)

To clear the data being displayed, press the INFO button for more than 1.5 seconds. After pressing the INFO button, - - - km/h (- - - mph) will be displayed for about 1 minute before the vehicle speed is recalculated and displayed.

Vehicle speed alarm mode (Some Models)

In this mode, the current setting for the vehicle speed alarm is displayed. You can change the vehicle speed setting at which the warning is triggered.

 


The vehicle speed alarm display is activated at the same time the beep sound is heard. The set vehicle speed flashes several times.

Close Note
View Note

The vehicle speed alarm can be set using the INFO switch.

 


  • Always set the vehicle speed according to the laws and regulations of the country/city in which the vehicle is driven. In addition, always verify the speed of the vehicle using the speedometer.

  • The vehicle speed alarm function can be set between 30 and 250 km/h (20 and 150 mph).

Close Note
View Note

The vehicle speed alarm can be set using the following procedure.

  1. Press the INFO switch on the speed alarm screen.

  2. Press the INFO button until the beep sounds.

  3. Press the up or down part of the INFO switch to select the desired vehicle speed.

  4. Press the INFO button until the beep sounds.