The headlights switch between high and low beams by moving the lever forward or backward.
When the headlight high-beams are on, the headlight high-beam indicator light is turned on.
The ignition must be switched ON to use the wiper.
Turn the wiper on by turning the rear wiper/washer switch.
Switch Position |
Wiper operation |
||
---|---|---|---|
No. |
Type A |
Type B |
|
![]() |
Stop |
||
![]() |
![]() |
![]() |
Intermittent |
![]() |
![]() |
![]() |
Normal |
To spray washer fluid, turn the rear wiper/washer switch to the position. After the switch is released, the washer will stop.
If the washer does not work, inspect the fluid level (Search). If the fluid level is normal and the washer still does not work, consult an expert repairer, we recommend an Authorised Mazda Repairer.