Owner Maintenance Precautions
Bonnet
Engine Compartment Overview
Engine Oil
Engine Coolant
Brake/Clutch Fluid
Window and Headlight Washer Fluid
Body Lubrication
Wiper Blades
Battery
Key Battery Replacement
Tyres
Light Bulbs
Fuses
Maintenance and CareOwner MaintenanceEngine Oil

Inspecting Engine Oil Level

  1. Be sure the vehicle is on a level surface.

  2. Warm up the engine to normal operating temperature.

  3. Turn it off and wait at least 5 minutes for the oil to return to the sump.

  4. Pull out the dipstick, wipe it clean, and reinsert it fully.

    SKYACTIV-G 2.0

     

    SKYACTIV-D 1.5

     

     

    (SKYACTIV-D 1.5)

    When inspecting the engine oil level, pull out the dipstick straight without twisting. In addition, when inserting the dipstick, always insert it without twisting so that the “X” mark faces the front of the vehicle.

    Close Note
    View Note

  5. Pull it out again and examine the level.

    The level is normal if it is between Low and Full.

    If it is near or below Low, add enough oil to bring the level to Full.

     

    Do not overfill the engine oil. This may cause engine damage.

    Close Caution
    View Caution

  6. Make sure the O-ring on the dipstick is positioned properly before reinserting the dipstick.

  7. Reinsert the dipstick fully.