Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to flash after a turn, manually return the lever to its original position.
The direction indicators (green) in the instrument cluster flash according to the operation of the direction indicator lever to show which signal is working.
If an indicator light stays on without flashing or if it flashes abnormally, one of the direction indicator bulbs may be burned out.
A personalised function is available to change the turn indicator sound volume. (Search)
Move the lever halfway toward the direction of the lane change―until the indicator flashes― and hold it there. It will return to the off position when released.
The ignition must be switched ON to use the wiper.
Turn the wiper on by turning the rear wiper/washer switch.
Switch Position |
Wiper operation |
||
---|---|---|---|
No. |
Type A |
Type B |
|
![]() |
Stop |
||
![]() |
![]() |
![]() |
Intermittent |
![]() |
![]() |
![]() |
Normal |
To spray washer fluid, turn the rear wiper/washer switch to the position. After the switch is released, the washer will stop.
If the washer does not work, inspect the fluid level (Search). If the fluid level is normal and the washer still does not work, consult an expert repairer, we recommend an Authorised Mazda Repairer.