i-ACTIVSENSE (Some Models)
Adaptive Front Lighting System (AFS) (Some Models)
High Beam Control System (HBC) (Some Models)
Lane Departure Warning System (LDWS) (Some Models)
Blind Spot Monitoring (BSM) System (Some Models)
Distance Recognition Support System (DRSS) (Some Models)
Rear Cross Traffic Alert (RCTA) (Some Models)
Mazda Radar Cruise Control (MRCC) (Some Models)
Adjustable Speed Limiter (Some Models)
Smart City Brake Support (SCBS) (Some Models)
Smart Brake Support (SBS) (Some Models)
Forward Sensing Camera (FSC) (Some Models)
Radar Sensor (Front) (Some Models)
Laser Sensor (Front) (Some Models)
Radar Sensors (Rear) (Some Models)

Setting the System

To Activate

With adjustable speed limiter

To activate the system, press the ON/OFF switch.

Without adjustable speed limiter

To activate the system, press the ON switch.

When the ON switch is pressed, the vehicle speed and the distance between vehicles while in headway control can be set. The Mazda Radar Cruise Control (MRCC) indication is shown in the display of the instrument cluster.

 


  • When the ignition is switched to ACC or OFF while the Mazda Radar Cruise Control (MRCC) is ON, the Mazda Radar Cruise Control (MRCC) remains ON automatically.

Close Note
View Note

How to Set the Speed

  1. Adjust the vehicle speed to the desired setting using the accelerator pedal.

  2. Headway control begins when the SET or SET switch is pressed. The set speed and the inter-vehicle distance display filled with white lines are displayed. The Mazda Radar Cruise Control (MRCC) indicator light (green) is indicated simultaneously.

Travel status

Display

During travel at constant speed

During travel under headway control

 


  • If a vehicle ahead is detected while travelling at a constant speed, the vehicle-ahead indication is displayed and headway control is performed. Additionally, when a vehicle ahead is no longer detected, the vehicle-ahead indication turns off and the system switches back to travel at constant speed.

  • If you are driving the vehicle at a speed faster than the set speed, headway control on the vehicle ahead is not possible Adjust the system to the desired vehicle speed using the accelerator pedal.

  • (European models)

    When switching to a passing lane and operating the direction indicator, the system provides more acceleration automatically if it determines that more acceleration is required. Drive while being careful of the road ahead because you could approach the vehicle ahead too closely.

Close Note
View Note

How to Set the Distance Between Vehicles During Headway Control

The distance between vehicles is set to a shorter distance each time the switch is pressed. The distance between vehicles is set to a longer distance by pressing the switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short, and extremely short distance.

Distance-between-vehicles guideline

(at 80 km/h (50 mph) vehicle speed)

Indication on display

Long (about 50 m (164 ft))

Medium (about 40 m (131 ft))

Short (about 30 m (98 ft))

Extremely short (about 25 m (82 ft))

 


  • The distance between vehicles differs depending on the vehicle speed, and the slower the vehicle speed, the shorter the distance.

  • When the ignition is switched to ACC or OFF and then the engine is started again, the system automatically sets the distance between vehicles to the previous setting.

Close Note
View Note

Changing the Set Vehicle Speed

Changing the set vehicle speed using the SET switch

Press the SET switch to accelerate.

Press the SET switch to decelerate.

The set vehicle speed changes as follows each time the SET switch is pressed.

European models

Except European models

Short press

1 km/h (1 mph)

5 km/h (5 mph)

Long press

10 km/h (5 mph)

 


For example, the set vehicle speed is changed by pressing the SET switch four times as follows:

(European models)

The vehicle speed accelerates or decelerates by 4 km/h (4 mph).

(Except European models)

The vehicle speed accelerates or decelerates by 20 km/h (20 mph).

Close Note
View Note

To accelerate using the accelerator pedal

Depress the accelerator pedal and press and release the SET or SET switch at the desired speed. If a switch cannot be operated, the system returns to the set speed when you release your foot from the accelerator pedal.

 


The warnings and brake control do not operate while the accelerator pedal is depressed.

Close Caution
View Caution

 


  • When accelerating using the SET switch while in headway control, the set vehicle speed can be adjusted but acceleration is not possible. If there is no longer a vehicle ahead, acceleration continues until reaching the set vehicle speed. Check the set vehicle speed by viewing the set vehicle speed display in the active driving display.

  • When depressing the accelerator pedal, the inter-vehicle distance display in the active driving display changes to the white-line display.

  • The minimum settable speed is 30 km/h (19 mph). If the set vehicle speed reaches 30 km/h (19 mph) using the switch operation, constant speed travel is maintained at about 30 km/h (19 mph) even if the SET switch is pressed. The Mazda Radar Cruise Control (MRCC) system is not cancelled.

Close Note
View Note

To Deactivate

With adjustable speed limiter

The Mazda Radar Cruise Control (MRCC) is cancelled when the ON/OFF switch is pressed.

Without adjustable speed limiter

The Mazda Radar Cruise Control (MRCC) is cancelled when the OFF switch is pressed.

When the system is temporarily cancelled

In the following cases, the Mazda Radar Cruise Control (MRCC) system is temporarily cancelled. The Mazda Radar Cruise Control (MRCC) indicator light (green) turns off simultaneously.

  • The CANCEL switch is pressed.

  • The brake pedal is depressed.

  • The parking brake is applied.

  • (Automatic transaxle)

    The selector lever is shifted to park (P), neutral (N) or reverse (R).

  • (Manual transaxle)

    The shift lever is in the reverse (R) position .

  • In the following cases, the beep sounds one time.

    • The vehicle speed decreases to less than 25 km (16 mph).

    • The DSC has operated.

    • The TCS has operated for a certain period of time.

    • The Smart City Brake Support (SCBS) has operated.

    • The Smart Brake Support (SBS) has operated.

    • When travelling on a down slope for a long period of time.

    • There is a problem with the system.

    (Manual transaxle)

    • The shift lever is shifted to neutral (N) for a certain period of time.

    • The clutch is depressed for a certain period of time.

    • The engine stalls.

 


  • The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain, fog, snow or other inclement weather conditions, or the front surface of the radiator grille is dirty.

  • If you have temporarily cancelled the Mazda Radar Cruise Control (MRCC), you can return to your previously set speed by pressing the RES switch and after all of the operation conditions have been met.

  • If the OFF switch is pressed to cancel the Mazda Radar Cruise Control (MRCC), the system does not return to the previously set speed even if the RES switch is pressed.

Close Note
View Note