The coming home light turns on the headlights (low beams) when the lever is operated.
To turn on the lights
When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.
The headlights turn off after a certain period of time has elapsed after the doors are closed.
The time until the headlights turn off after all of the doors are closed can be changed.
Refer to Personalisation Features (Search).
If no operations are done for 3 minutes after the lever is pulled, the headlights turn off.
The headlights turn off if the lever is pulled again while the headlights are illuminated.
The ignition must be switched ON to use the turn and lane-change signals.
Move the signal lever down (for a right turn) or up (for a left turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to flash after a turn, manually return the lever to its original position.
The direction indicators (green) in the instrument cluster flash according to the operation of the direction indicator lever to show which signal is working.
If an indicator light stays on without flashing or if it flashes abnormally, one of the direction indicator bulbs may be burned out.
A personalised function is available to change the turn indicator sound volume. (Search)
After releasing the direction indicator lever, the direction indicator flashes three times. The operation can be cancelled by moving the lever in the direction opposite to which it was operated.
The three-flash turn signal function can be switched to operable/inoperable using the personalisation function.
Refer to Personalisation Features (Search).
The ignition must be switched ON to use the wiper.
Turn the wiper on by turning the rear wiper/washer switch.
Switch Position |
Wiper operation |
---|---|
![]() |
Stop |
![]() |
Intermittent |
![]() |
Normal |
To spray washer fluid, turn the rear wiper/washer switch to either of the position. After the switch is released, the washer will stop.
If the washer does not work, inspect the fluid level (Search). If the fluid level is normal and the washer still does not work, consult an expert repairer, we recommend an Authorised Mazda Repairer.