Keys
Keys
Keys
Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them:
Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed. Children may find these keys to be an interesting toy to play with and could cause the power windows or other controls to operate, or even make the vehicle move.
-
Because the key (transmitter) uses low-intensity radio waves, it may not function correctly under the following conditions:
-
The key (transmitter) is carried with communication devices such as cellular phones.
-
The key (transmitter) contacts or is covered by a metal object.
-
The key (transmitter) is near electronic devices such as personal computers.
-
Non-Mazda genuine electronic equipment is installed in the vehicle.
-
There is equipment which discharges radio waves near the vehicle.
-
-
The key (transmitter) may consume battery power excessively if it receives high-intensity radio waves. Do not place the key (transmitter) near electronic devices such as televisions or personal computers.
-
To avoid damage to the key (transmitter), DO NOT:
-
Drop the key (transmitter).
-
Get the key (transmitter) wet.
-
Disassemble the key (transmitter).
-
Expose the key (transmitter) to high temperatures on places such as the instrument panel or bonnet, under direct sunlight.
-
Expose the key (transmitter) to any kind of magnetic field.
-
Place heavy objects on the key (transmitter).
-
Put the key (transmitter) in an ultrasonic cleaner.
-
Put any magnetized objects close to the key (transmitter).
-
The driver must carry the key (transmitter) to ensure the system functions properly.
Transmitter
-
Transmitter (Search)
Auxiliary key
There is a removable auxiliary key inside the transmitter.
Removing the auxiliary key
-
Remove the lower cover while pressing the knob in the direction of the arrow.
-
Remove the auxiliary key.
Installing the auxiliary key
-
Install the auxiliary key as the illustration.
-
Insert the tabs of the lower cover into the slots of the transmitter and install the lower cover.
Key code number plate
A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key (auxiliary key).
Also write down the code number and keep it in a separate safe and convenient place, but not in the vehicle.
If your key (auxiliary key) is lost, consult an expert repairer (we recommend an Authorised Mazda Repairer) and have your code number ready.
-
Key code number plate
Keyless Entry System
Keyless Entry System
Transmitter
-
Operation indicator light
-
Lock button (
) -
Unlock button (
) -
Power liftgate button (
or 
) (Some Models) -
Intrusion sensor cancel button (
) (Some Models)
-
The headlights turn on/off by operating the transmitter. Refer to Leaving Home Light (Search).
-
(With theft-deterrent system)
The hazard warning lights flash when the theft-deterrent system is armed or turned off.
Refer to Theft-Deterrent System (Search).
-
(With the advanced keyless function (European models))
The setting can be changed so that a beep sound is heard for confirmation when the doors, liftgate, and fuel-filler flap are locked/unlocked using the key.
(With the advanced keyless function (Except European models))
A beep sound can be heard for confirmation when the doors, liftgate, and fuel-filler flap are locked/unlocked using the key. If you prefer, the beep sound can be turned off.
The volume of the beep sound can also be changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.
The operation indicator light flashes when the buttons are pressed.
Lock button
To lock the doors, liftgate, and fuel-filler flap, press the lock button and the hazard warning lights will flash once.
(With the advanced keyless function (Except European models))
A beep sound will be heard once.
-
If the lock button is pressed with any door or liftgate open, any closed door can be locked. Close any open door and liftgate to lock.
-
Make sure all the doors, liftgate, and fuel-filler flap are locked after pressing the button.
-
(With double locking system)
Pressing the lock button twice within 3 seconds will activate the double locking system.
Refer to Double Locking System (Search).
-
(With theft-deterrent system)
If the lock button is pressed with all the doors and liftgate closed, the hazard warning lights will flash and the theft-deterrent system is armed.
Unlock button
Type A
To unlock the driver's door and the fuel-filler flap, press the unlock button and the hazard warning lights will flash twice.
(With the advanced keyless function (Except European models))
A beep sound will be heard twice.
To unlock the other doors and liftgate, press the unlock button again within 5 seconds.
(With the advanced keyless function (Except European models))
A beep sound will be heard twice.
Type B
To unlock the doors, liftgate, and fuel-filler flap, press the unlock button and the hazard warning lights will flash twice.
(With the advanced keyless function (Except European models))
A beep sound will be heard twice.
-
(With 2-step unlocking function)
-
The system can be set to unlock all the doors, liftgate, and fuel-filler flap when pressing the unlock button once.
-
The system can be set to unlock the driver's door and the fuel-filler flap by pressing the unlock button on the transmitter, and to unlock the other doors and liftgate by pressing the button again within 5 seconds.
Refer to the Settings section in the Mazda Connect Owner's Manual.
-
-
(Auto re-lock function)
After unlocking with the key, all the doors, liftgate, and fuel-filler flap will automatically lock if any of the following operations are not performed within about 30 seconds. If your vehicle has a theft-deterrent system, the hazard warning lights will flash for confirmation.
-
A door or the liftgate is opened.
-
The ignition is switched to any position other than off.
The time required for the doors to lock automatically can be changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.
-
-
(With theft-deterrent system)
When the doors are unlocked by pressing the unlock button on the transmitter while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.
Power liftgate button (Some Models)
To open/close the liftgate, press the power liftgate button for one second or longer with the liftgate in the fully closed/open position.
The hazard warning lights flash twice and the liftgate opens/closes after the beep sounds.
For details on the power liftgate function, refer to Power Liftgate (Search).
Type A
Type B
Intrusion sensor cancel button (Some Models)
To cancel the intrusion sensor (part of the theft-deterrent system), press the intrusion sensor cancel button within 20 seconds after pressing the lock button and the hazard warning lights will flash 3 times.
Refer to Theft-Deterrent System (Search).
Power saving function
By turning on the transmitter power saving function, the advanced keyless entry*1 and push button start system functions turn off and the battery power consumption of the transmitter is restricted.
The remote control function is operational by operating the transmitter switch even while the power saving function is turned on. However, the operation indicator light of the transmitter does not turn on/flash.
Turning on the power saving function
After you have turned on the power saving function according to the following procedure, the hazard warning lights and sound operate*1 one time.
-
Press the lock button on the transmitter 4 times within 3 seconds to turn on the operation indicator light.
-
Press the lock button continuously for 1.5 seconds or longer while the operation indicator light turns on (for 5 seconds).
-
Press any of the buttons on the transmitter to make sure that the operation indicator light does not turn on/flash.
Turning off the power saving function
After you have turned off the power saving function according to the following procedure, the hazard warning lights and sound operate*1 one time.
-
Press any of the buttons on the transmitter to make sure that the operation indicator light does not turn on/flash.
-
Press the lock button on the transmitter 4 times within 3 seconds to turn on the operation indicator light.
-
Press the lock button continuously for 1.5 seconds or longer while the operation indicator light turns on (for 5 seconds).
-
With the advanced keyless function
Operational Range
The system operates only when the driver is in the vehicle or within operational range while the key is being carried.
Starting the Engine
-
Starting the engine may be possible even if the key is outside of the vehicle and extremely close to a door and window, however, always start the engine from the driver's seat.
If the vehicle is started and the key is not in the vehicle, the vehicle will not restart after it is shut off and the ignition is switched to off.
-
The luggage compartment is out of the assured operational range, however, if the key (transmitter) is operable the engine will start.
With the advanced keyless function
-
Interior aerial
-
Operational range
Without the advanced keyless function
-
Interior aerial
-
Operational range
The engine may not start if the key is placed in the following areas:
-
Around the instrument panel
-
In the storage compartments such as the glove compartment or the centre console
Key Suspend Function
If a key is left in the vehicle, the functions of the key left in the vehicle are temporarily suspended to prevent theft of the vehicle.
To restore the functions, press the unlock button on the functions-suspended key in the vehicle.
