Intelligent Speed Assistance (ISA) Display

The setting status of the ISA is displayed in the active driving display or the display in the instrument cluster.

Status

Indication on multi-information display/active driving display

Explanation

Stand-by display

Displays when the speed limiter switch is operated and the system is turned on.

Turns off when the system is turned off.

Setting display

Displays when the RES switch up (SET+) or down (SET-) is operated (while the ISA set indication is displayed), and the speed is set.

Cancel display

Displays when any of the following operations is done and the system is temporarily cancelled.

  • CANCEL switch is operated

  • Accelerator pedal is strongly depressed

  • Any door is opened

  • The driver’s seat belt is unfastened

Warning display

If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or more, the ISA display flashes.

The display flashes until the vehicle speed decreases to the set speed or less.

A warning beep is activated at the same time as the warning display.

Refer to Speed Limiter Warning Beep (Search).

Page top