Indicator Light/Beep Sound
The indicator light turns on/flashes and beep sounds are activated to notify the driver of the system operation status or if there is a problem with the system.
|
Status |
Indicator light |
Beep sound status |
On/flashing conditions |
||
|---|---|---|---|---|---|
|
Green |
Red |
Flash interval |
|||
|
Diagnosis |
Turns on |
Turns on |
― |
― |
When the ignition is switched ON, it turns on and then turns off after a few seconds. |
|
Normal |
Turns off |
Turns off |
― |
― |
The system is operating normally. |
|
Malfunction |
Turns off |
Turns on |
― |
3 beeps (Slow intermittent sound) |
If the indicator light (red) remains on constantly, the system will not operate normally. Have the vehicle inspected at an expert repairer (we recommend an Authorised Mazda Repairer) as soon as possible. |
|
Call being made with call centre |
Flashes |
Turns off |
Slow (0.5 second intervals) |
The beep does not sound, but the ringback tone can be heard. |
An emergency call is being made by the Emergency call system. |
|
Vehicle information is being transmitted |
Flashes |
Turns off |
Somewhat quick (0.3 second intervals) |
― |
Vehicle information is being transmitted to the call centre. |
|
Start of voice call |
Turns on |
Turns off |
― |
1 beep |
During a voice call with the call centre. |
|
During voice call |
Turns on |
Turns off |
― |
― |
|
|
Connection failure |
Flashes |
Turns on |
Quick (0.15 second intervals) |
3 beeps (Fast intermittent sound) |
When an emergency call fails to connect. |
