i-stop Warning Light (Amber)/i-stop Indicator Light (Green)

To ensure safe and comfortable use of the vehicle, the i-stop system constantly monitors the driver's operations, the vehicle's interior and exterior environment, and the operational status of the vehicle, and uses the i-stop warning light (amber) and i-stop indicator light (green) to inform the driver of various cautions and warnings.

 

On vehicles equipped with the centre display, the i-stop operation status is displayed in the fuel efficiency monitor display.

Refer to the Fuel Efficiency Monitor section in the Mazda Connect Owner's Manual.

Close Note
View Note

i-stop warning light (amber)

When the light is turned on

  • The light turns on when the ignition is switched ON and turns off when the engine is started.

 

A problem in the system may be indicated under the following conditions. Have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer).

  • The light does not turn on when the ignition is switched ON.

  • The light continues to remain on while the engine is running.

Close Note
View Note

When the light is flashing

The light continues to flash if the system has a malfunction. Have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer).

i-stop indicator light (green)

When the light is turned on

  • The light turns on while engine idling is stopped and turns off when the engine is restarted.

When the light is flashing

  • (Manual transmission)

    • The light flashes when the shift lever is shifted to a position other than the neutral while engine idling is stopped to notify the driver that engine idling is stopped.

    • By depressing the clutch pedal, the engine restarts automatically and the light turns off.

Page top