|
Depress Brake Pedal. Brake Hold Disabled
|
This message is indicated when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function.
|
Depress the brake pedal. Cancel the AUTOHOLD function and have your vehicle inspected at an expert repairer (we recommend an Authorised Mazda Repairer).
|
|
Steep Slope. Continue Pressing Brake Pedal to Hold Stopped Position
|
This message indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function, such as on steep slopes.
|
Depress and hold your foot on the brake pedal.
|
|
Depress Brake Pedal and Operate Switch to Release EPB
|
This message is indicated when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal.
|
Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal.
|
|
Depress Brake Pedal and Operate Switch to Release
|
This message is indicated when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function.
|
Cancel the AUTOHOLD function stop hold control while depressing the brake pedal.
|
|
Mazda Radar Cruise Control Cancelled. Drive Safely
|
This message is indicated when the Mazda Radar Cruise Control (MRCC), Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and the Cruising & Traffic Support (CTS) have been cancelled other than by the driver.
|
Have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer).
|
|
Distance & Speed Alert Operation Cancelled Drive Safely
|
This message is indicated when the Distance & Speed Alert (DSA) have been cancelled other than by the driver.
|
Have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer).
|
|
Cruise Control Operation Cancelled. Drive Safely
|
This message is indicated when the Cruise Control have been cancelled other than by the driver.
|
Have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer).
|
|
Emergency Braking Activated. Depress Brake Pedal to Hold Stop
|
This message is indicated after the Smart Brake Support (SBS) brakes operate and when the Smart Brake Support (SBS) is cancelled.
|
Depress the brake pedal.
|
|
Touch Key Fob to Push Button Start Switch
|
This message is indicated when the key battery is weak (battery dead or damaged key).
|
Touch the key against push button start to start the engine.
Refer to Engine Start Function When Key Battery is Dead (Search).
|
|
Depress Brake Pedal to Start Engine
|
This message is indicated when the push button start is pressed without depressing the brake pedal.
|
When starting the engine, press the push button start with the brake pedal depressed.
|
|
Depress Clutch Pedal to Start Engine
|
This message is indicated when the push button start is pressed without depressing the clutch pedal.
|
When starting the engine, press the push button start with the clutch pedal depressed.
|
|
Press Push Button Start Switch While Turning Steering Wheel Left or Right
|
This message is indicated while the steering wheel is locked.
|
Release the steering wheel lock by pressing the start button while turning the steering wheel to the left and right.
|
|
Check Gear Selector Lever Position
|
This message is indicated when the selector lever is shifted to the P or R position while driving.
|
Check the selector lever position.
|
|
Close Door and Fasten Seat Belt
|
This message is indicated when AUTOHOLD is about to operate and a door is opened or a seat belt is unfastened.
|
When the AUTOHOLD is turned on, close the doors and fasten seat belts.
|
|
Wiper Blades Must Be on Windscreen Before Operating
|
This message is indicated when the ignition is switched ON with the wiper arms at the service positions.
|
Return the wiper arms to the initial positions.
|
|
Windscreen Wiper Range of Motion Reduced. Remove Obstruction(s)
|
This message is indicated when there is snow or dirt accumulation on the windscreen and the wiper operation range is narrowed.
|
Remove foreign matter from the windscreen.
|
|
Ignition Not Switched Off
|
This message is indicated when the driver’s door is opened without switching the ignition OFF.
|
Switch the ignition OFF before leaving the vehicle.
|
|
Gear Selector Lever Not in Park
|
Displays when the push button start is pressed while the selector lever is in a position other than P, and the ignition is switched to ACC.
|
Shift the selector lever to the P position and then switch the ignition OFF.
|
|
Excessive Transmission Temperature. Drive Slowly
|
This message is indicated when the internal temperature of the automatic transmission is high.
|
Drive slowly to reduce load on the automatic transmission.
|
|
Excessive Transmission Temperature. Stop Vehicle in a safe Location
|
This message is indicated when the automatic transmission fluid temperature is abnormally high.
|
Park the vehicle in a safe place immediately and contact an expert repairer (we recommend an Authorised Mazda Repairer).
|
|
Shift Into Park Before Exiting Vehicle
|
This message is indicated when the driver’s door is opened with the shift lever in a position other than the P position.
|
Close the driver’s door or shift the shift lever to the P position.
|
|
|
|
