Keys

(With the advanced keyless function)

The setting can be changed so that a beep sound is heard for confirmation when the doors and liftgate are locked/unlocked using the key.

The volume of the beep sound can also be changed.

Refer to Personalisation Features (Search).

Use the following procedure to change the setting.

1. Switch the ignition off and close all of the doors and the liftgate.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

   All of the doors and the liftgate lock and the beep sound activates at the currently set volume. (If the beep sound is currently set to not activate, it will not activate.) The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

4. The setting change is completed by doing any one of the following:

   • Switch the ignition to ACC or ON.

   • Close the driver's door.

   • Open the liftgate.

   • The key is not operated for 10 seconds.

   • Press any button except the LOCK button on the key.

   • A request switch is pressed.

• The doors and the liftgate cannot be locked by pressing the lock button while any other door or the liftgate is open. The hazard warning lights will also not flash.

• Make sure all doors and the liftgate are locked after pressing the button.

(Auto re-lock function)

After unlocking with the key, all doors and the liftgate will automatically lock if any of the following operations are not performed within about 30 seconds.

The time required for the doors to lock automatically can be changed.

Refer to Personalisation Features (Search).

• A door or the liftgate is opened.

• The push button start is switched to any position other than off.