Power Sunroof Reset Procedure

If the battery is disconnected, the sunroof will not operate. The sunroof will not operate correctly until it is reset. Carry out the following procedure to reset the sunroof and resume operation:

  1. Switch the ignition ON.

  2. Press the tilt switch, to partially tilt open the rear of the sunroof.

  3. Repeat Step 2. The rear of the sunroof tilts open to the fully open position, then closes a little.

 

If the reset procedure is performed while the sunroof is in the slide position (partially open) it will close before the rear tilt opens.

Close Note
View Note

Page top