How to Arm the System
-
Close the windows and the sunroof (Some Models) securely.
(With the intrusion sensor)
Even with a window or the sunroof (Some Models) open, the system can be armed, however, leaving the windows and the sunroof (Some Models) even partially open can invite theft, and wind blowing into the vehicle could trigger the alarm.
The intrusion sensor function can also be cancelled.
Refer to Cancelling the Intrusion Sensor (With Intrusion Sensor) (Search).
-
Switch the ignition OFF.
-
Make sure the bonnet, the doors, and the liftgate are closed.
-
Press the lock button on the transmitter or lock the driver's door from the outside with the auxiliary key.
The hazard warning lights will flash once.
(With the advanced keyless function)
Press a request switch.
The security indicator light in the instrument cluster flashes twice per second for 20 seconds.
-
After 20 seconds, the system is fully armed.
-
The theft-deterrent system can also be armed by activating the auto relock function with all the doors, the liftgate and the bonnet closed.
Refer to Transmitter (Search).
-
The system will disarm if one of the following operations takes place within 20 seconds after pressing the lock button:
-
Unlocking any door.
-
Opening any door.
-
Opening the bonnet.
-
Switching the ignition ON.
To rearm the system, do the arming procedure again.
-
-
When the doors are locked by pressing the lock button on the transmitter or using the auxiliary key while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.
-
