Audio Set [Type A (non-touchscreen)]

Power/Volume/Sound Controls

Power/Volume/Sound Controls

Power ON/OFF

Switch the ignition to ACC or ON. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off.

Volume adjustment

To adjust the volume, turn the power/volume dial. Turn the power/volume dial clockwise to increase volume, anticlockwise to decrease it.

Bluetooth® Audio (Some Models)

Bluetooth® Audio (Some Models)

Applicable Bluetooth® specification (Recommended)

Ver. 2.0

 

Response profile

  • A2DP (Advanced Audio Distribution Profile) Ver. 1.0

  • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3

 

A2DP is a profile which transmits only audio to the Bluetooth® unit. If your Bluetooth® audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system. In this case, only the operations on the mobile device are available the same as when a portable audio device for a non-compliant Bluetooth® device is connected to the AUX terminal.

Function

A2DP

AVRCP

Ver. 1.0

Ver. 1.3

Playback

—

X

X

Pause

—

X

X

File (Track) up/down

—

X

X

Reverse

—

—

X

Fast-forward

—

—

X

Text display

—

—

X

X: Available

—: Not available

 

  • The battery consumption of Bluetooth® audio devices increases while Bluetooth® is connected.

  • If a general mobile phone device is USB connected during music playback over the Bluetooth® connection, the Bluetooth® connection is disconnected. For this reason, you cannot have music playback over a Bluetooth® connection and music playback using a USB connection at the same time.

  • The system may not operate normally depending on the Bluetooth® audio device.

Close Note
View Note

Playback

  1. To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode to Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)

  2. To stop playback, press the Play/Pause button (4).

  3. Press the button again to resume playback.

Selecting a file (track)

Selects the next file (track)

Short-press the track up button ().

Selects the beginning of the current file (track)

Short-press the track down button ().

Fast-forward/Reverse (AVRCP Ver. 1.3)

Fast-forward

Press and hold the fast-forward button ().

Reverse

Press and hold the reverse down button ().

Switching the display (only AVRCP Ver. 1.3)

The information displayed on the audio display changes as follows each time the text button (3) is pressed during playback.

Button

Information displayed on audio display

Elapsed time

Album name

Song name

Artist name

 

  • If title information is not available, “NO TITLE” is displayed.

  • This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk ().

Close Note
View Note

Display scroll

Only 13 characters can be displayed at one time. To display the rest of the characters of a long title, press and hold the text button (3). The display scrolls the next 13 characters. Press and hold the text button (3) again after the last 13 characters have been displayed to return to the beginning of the title.

Page top