Instrument Cluster and Display

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

 

If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible.

Refer to Taking Action (Search).

 


  • After refuelling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.

  • The direction of the arrow () indicates that the fuel-filler flap is on the left side of the vehicle.

(SKYACTIV-D 2.2)

If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.

Indication/Indicator Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal

Indicator

Page

(Green)

Seat Belt Indicator Light (Rear seat)

(Search)

Front Passenger Air Bag Deactivation Indicator Light*1

(Search)

(Green)

i-stop Indicator Light

(Search)

Security Indicator Light*1

(Search)

Vehicle Speed Alarm Indication

(Search)

Wrench Indication

(Search)

Glow Indicator Light*1 (Some Models)

(Search)

Diesel Particulate Filter Indication (Some Models)

(Search)

Shift Position Indication

(Search)

Lights-On Indication/Indicator Light

(Search)

Headlight High-Beam Indicator Light

Headlight High-Low Beam

(Search)

Flashing the Headlights

(Search)

Fog Light Indicator Light

(Search)

Direction Indicator/Hazard Warning Indicator Lights

Turn and Lane-Change Signals

(Search)

Hazard Warning Flasher

(Search)

Electric Parking Brake (EPB) Indication/Indicator Light*1*2

(Search)

AUTOHOLD Active Indicator Light*1

(Search)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light

(Search)

TCS/DSC Indicator Light*1

Traction Control System (TCS)

(Search)

Dynamic Stability Control (DSC)

(Search)

Turns on

(Search)

TCS OFF Indicator Light*1

(Search)

Select Mode Indication (Some Models)

(Search)

(Green)

Adaptive LED Headlights (ALH) Indicator Light

(Search)

Blind Spot Monitoring (BSM) OFF Indicator Light*1

Except malfunction

(Search)

Malfunction

(Search)

(White)

Driver Attention Alert (DAA) Indication

(Search)

(White)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Main Indication

(Search)

(Green)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication

(Search)

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Indication

(Search)

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) OFF Indicator Light*1

(Search)

Smart City Brake Support (SCBS) Indication

Advanced Smart City Brake Support (Advanced SCBS)

(Search)

Smart City Brake Support [Reverse] (SCBS R)

(Search)

Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator Light*1

Advanced Smart City Brake Support (Advanced SCBS)

(Search)

Smart City Brake Support [Reverse] (SCBS R)

(Search)

Smart Brake Support (SBS) System

(Search)

(White)

Adjustable Speed Limiter (ASL) Main Indication

(Search)

(Green)

Adjustable Speed Limiter (ASL) Set Indication

(Search)
  1. The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

  2. The light turns on continuously when the parking brake is applied.

Speedometer

The speedometer indicates the speed of the vehicle.

Tachometer

The tachometer shows engine speed in thousands of revolutions per minute (rpm).

 


Do not run the engine with the tachometer needle in the RED ZONE.

This may cause severe engine damage.

 

 


When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.

Multi-information Display (Type B)

The multi-information display indicates the following information.

  • Odometer

  • Trip meter

  • Engine coolant temperature gauge

  • Fuel gauge

  • Outside temperature

  • Distance-to-empty

  • Average fuel economy

  • Current fuel economy

  • Maintenance Monitor

  • Blind Spot Monitoring (BSM) Display

  • Distance Recognition Support System (DRSS) Display

  • Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Display

  • Mazda Radar Cruise Control (MRCC) Display

  • Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

  • Adjustable Speed Limiter (ASL) Display

  • Vehicle Speed Alarm

  • Warning message

The screen content changes each time the INFO switch is pressed.

Average Fuel Economy

The average fuel economy is calculated every minute from the total travelled distance on the trip meter and the total fuel consumption, and the average fuel economy for either TRIP A or TRIP B is displayed.

 

The average fuel economy and trip meters can be reset by pressing the INFO switch for 1.5 seconds or more while in each mode. After the data is cleared, the fuel consumption is recalculated and the - - - L/100 km (- - - mpg) for the 1 minute prior to it being displayed is indicated.

Current Fuel Economy

This displays the current fuel economy by calculating the amount of fuel consumption and the distance travelled.

 

 


Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.

Vehicle Speed Alarm

In this mode, the current setting for the vehicle speed alarm is displayed. You can change the vehicle speed setting at which the warning is triggered.

 


The vehicle speed alarm display is activated at the same time the beep sound is heard.

The vehicle speed alarm can be set using the centre display.

 


Always set the vehicle speed according to the laws and regulations of the country/city in which the vehicle is driven. In addition, always verify the speed of the vehicle using the speedometer.

Maintenance Monitor

The following maintenance period notifications can be displayed by turning the Maintenance Monitor on.

  • Scheduled Maintenance

  • Tyre Rotation

  • Oil Change

When the remaining days to the maintenance period is 15 days or less, or the remaining distance is 1,000 km (600 miles) or shorter, a message is indicated when the ignition is switched ON.

For the setting method and indications for the maintenance monitor, refer to the Maintenance Monitor.

Refer to Maintenance Monitor (Search).

Blind Spot Monitoring (BSM) Display

Displays the system status.

 

Refer to Blind Spot Monitoring (BSM) (Search).

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display (Some Models)

Displays the currently set system status.

 

Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).

Warning (Display Indication)

A message is displayed to notify the user of the system operation status and malfunctions or abnormalities.

If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol.

Refer to If a Warning Light Turns On or Flashes (Search).

For messages not indicating a symbol, follow the instructions indicated in the multi-information display.

Refer to Message Indicated in Multi-information Display (Search).

Warning Indication/Warning Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal

Warning

Page

Brake System Warning Light*1

(Search)

ABS Warning Light*1

Electronic Brake Force Distribution System Warning

(Search)

ABS warning

(Search)

Charging System Warning Indication/Warning Light*1

(Search)

Engine Oil Warning Light*1

(Search)

(Red)

High Engine Coolant Temperature Warning Light*1

(Search)

Power Steering Malfunction Indication

(Search)

Master Warning Indication/Warning Light

(Search)

Electric Parking Brake (EPB) Warning Indication/Warning Light*1

(Search)

Check Engine Light*1

(Search)

(Amber)

i-stop Warning Light*1

(Search)

Automatic Transaxle Warning Indication (Some Models)

(Search)

Air Bag/Seat Belt Pretensioner System Warning Light*1

(Search)

Tyre Pressure Monitoring System Warning Light*1

Flashing

(Search)

Turns on

(Search)

(Amber/White)

KEY Warning Indication

Amber

(Search)

White

(Search)

(Amber)

High Beam Control System (HBC) Warning Indication/Warning Light*1 (Some Models)

(Search)

Adaptive LED Headlights (ALH) Warning Indication/Warning Light*1 (Some Models)

(Search)

Blind Spot Monitoring (BSM) Warning Indication

(Search)

(Amber)

Driver Attention Alert (DAA) Warning Indication

(Search)

(Amber)

Mazda Radar Cruise Control (MRCC) Warning Indication (Some Models)

(Search)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Warning Indication (Some Models)

(Search)

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Warning Indication

(Search)

LED Headlight Warning Light*1

(Search)

Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning Indication

(Search)

Low Fuel Warning Indication

(Search)

Engine Oil Level Warning Light*1

(Search)

Seat Belt Warning Light (Front seat)

(Search)

(Red)

Seat Belt Warning Light (Rear seat)

(Search)

Door-Ajar Warning Indication

(Search)

Liftgate-Ajar Warning Indication

(Search)
  1. The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

Wrench Indicator Light

The wrench indication is displayed under the following conditions.

  • When the preset maintenance period has arrived.

    Refer to Maintenance Monitor (Search).

  • When the engine oil replacement period has arrived.

  • (SKYACTIV-D 2.2)

    • When the engine oil has deteriorated.

    • When fuel filter (sedimentor) draining is required. Consult an expert repairer, we recommend an Authorised Mazda Repairer.

 


  • The wrench indication may display earlier than the preset period depending on vehicle usage conditions.

  • Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.

    Your Authorised Mazda Repairer will be able to reset the engine control unit or see (Search) for the Vehicle engine control unit reset procedure.

 

Glow Indicator Light (SKYACTIV-D 2.2)

When the ignition is switched ON, the glow indicator light turns on. The glow indicator light turns off when preheating is finished.

 

A problem in the system might be indicated under the following conditions. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.

  • The glow indicator light does not turn on when the ignition is switched ON or it remains on.

  • The glow indicator light is flashing.

 


If the vehicle is left with the ignition switched ON without starting the engine and a long period of time has elapsed since preheating finished, the preheating may be performed again and the glow indicator light may turn on.

Page top