Setting the System

 

Always verify the safety of the surrounding area when setting the ASL:

If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the set speed. Verify the safety of the surrounding area and keep a safer distance between vehicles ahead and behind you.

Close Warning
View Warning

  1. Press the MODE switch to turn the system on.

  2. (With cruise control)

    Press the SET/ to set the speed. When the current vehicle speed is 30 km/h (20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).

    (With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function))

    Press the SET or SET to set the speed. When the current vehicle speed is 30 km/h (20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).

  3. (With cruise control)

    To increase the set speed, press the RES/ switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the RES/ switch momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the RES/ switch 4 times.

    (With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function))

    To increase the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the SET switch 4 times.

  4. (With cruise control)

    To decrease the set speed, press the SET/ switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET/ switch momentary. For example, the set speed decreases about 4 km/h (4 mph) by pressing the SET/ switch 4 times.

    (With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function))

    To decrease the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed decreases about 4 km/h (4 mph) by pressing the SET switch 4 times.

 

  • (With cruise control)

    When the vehicle set speed is displayed in the instrument cluster, press the RES/ switch to set the displayed vehicle speed.

    (With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function))

    When the vehicle set speed is displayed in the instrument cluster, press the RES switch to set the displayed vehicle speed.

  • The system is temporarily cancelled when the vehicle is accelerated by depressing the accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the set speed or less.

  • The vehicle speed may exceed the set speed on a down slope.

Close Note
View Note

Page top