Seat Warmer/Seat Ventilation/Heated Steering Wheel
Seat Ventilation (Some Models)
The seat ventilation uses fans installed in the seats to draw air around the seat surface and ventilate them. The ignition must be switched ON.
Press the seat ventilation switch while the ignition is switched ON to operate the seat ventilation. The indicator lights turn on to indicate that the seat ventilation is operating. The mode changes as follows each time the seat ventilation switch is pressed.
-
Do not use organic solvents to clean the seat. It may damage the seat surface and the seat ventilation parts.
-
Do not place heavy objects with sharp projections on the seat, or insert needles or pins into it.
-
Use the seat ventilation when the engine is running. Leaving the seat ventilation on for long periods with the engine not running could cause the battery power to be depleted.
-
The seat ventilation cannot be used at the same time as the front seat warmer.
Heated Steering Wheel (Some Models)
The grips on the left and right of the steering wheel can be warmed up.
The ignition must be switched ON.
Press the switch to turn on the heated steering wheel. The heated steering wheel operates for about 30 minutes and then turns off automatically.
The indicator light illuminates when the heater is operating.
To turn off the heated steering wheel before the 30 minutes has elapsed, press the switch again.
The following types of persons should be careful not to touch the steering wheel. Otherwise, it could cause a low-temperature burn.
-
Infants, small children, elderly people, and physically challenged people
-
People with delicate skin
-
People who are excessively fatigued
-
People who are intoxicated
-
People who have taken sleep-inducing medicine such as sleeping pills or cold medicine
