Doors and Locks

Confirm that all doors and the liftgate are securely locked.

For the liftgate, move it without pressing the electric liftgate opener to verify that the liftgate has not been left ajar.

All doors and the liftgate cannot be locked when any door or the liftgate is open.

It may require a few seconds for the doors to unlock after the request switch is pressed.

A beep sound is heard for confirmation when the doors and the liftgate are locked/unlocked using the request switch. If you prefer, the beep sound can be turned off.

The volume of the beep sound can also be changed. Refer to Other Equipment/Functions (Search).

The setting can be changed so that the doors and the liftgate are locked automatically without pressing the request switch.

Refer to Other Equipment/Functions (Search).

(Walk-away auto lock function)

A beep sound is heard when all doors and the liftgate are closed while the advanced key is being carried. All doors and the liftgate are locked automatically after about 3 seconds when the advanced key is out of the operational range. Also, the hazard warning lights flash once. (Even if the driver is in the operational range, all doors and the liftgate are locked automatically after about 30 seconds.) If you are out of the operational range before the doors and the liftgate are completely closed or another key is left in the vehicle, the walk-away auto lock function will not work. Always make sure that all doors and the liftgate are closed and locked before leaving the vehicle. The walk-away auto lock function does not close the power windows.

(Auto re-lock function)

After unlocking with the request switch, all doors and the liftgate will automatically lock if any of the following operations are not performed within about 30 seconds.

The time required for the doors to lock automatically can be changed.

Refer to Other Equipment/Functions (Search).

• Opening a door or the liftgate.

• Switching the ignition to any position other than off.