Setting the System

 

Always verify the safety of the surrounding area when setting the ISA:

If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the set speed. Verify the safety of the surrounding area and keep a safer distance between vehicles ahead and behind you.

Close Warning
View Warning

How to set the speed limit using the SET switch

  1. Press the MODE switch to turn the system on.

  2. Press the SET or SET to set the speed. When the current vehicle speed is 30 km/h (20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).

  3. To increase the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the SET switch 4 times.

  4. To decrease the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed decreases about 4 km/h (4 mph) by pressing the SET switch 4 times.

 

  • When the vehicle set speed is displayed in the active driving display/instrument cluster, press the RES switch to set the displayed vehicle speed.

  • The system is temporarily cancelled when the vehicle is accelerated by depressing the accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the set speed or less.

  • The vehicle speed may exceed the set speed on a down slope.

Close Note
View Note

How to set the speed limit from the speed limit sign

  1. Press the MODE switch to turn the system on.

  2. Press the RES switch while the speed limit sign setting indication is being displayed in the active driving display/instrument cluster to set the vehicle speed of the displayed speed limit sign.

 

  • The system is temporarily cancelled when the vehicle is accelerated by depressing the accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the set speed or less.

  • The vehicle speed may exceed the set speed on a down slope.

  • The speed limit cannot be set from the speed limit sign when the speed limit sign indication is displayed in gray.

Close Note
View Note

Page top