Air-Conditioning System

Operating Tips

Operate the air-conditioning system with the engine running.
To prevent the battery from being discharged, do not leave the fan control switch on for a long period of time with the ignition switched ON when the engine is not running.
The airflow amount may decrease slightly while the i-stop function is operating.
Clear all obstructions such as leaves, snow and ice from the bonnet and the air inlet in the cowl grille to improve the system efficiency.
Use the air-conditioning system to defog the windows and dehumidify the air.
The recirculate mode should be used when driving through tunnels or while in a traffic jam, or when you would like to shut off outside air for quick cooling of the interior.
Use the outside air position for ventilation or windscreen defrosting.
If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the air-conditioning system.

Run the air conditioner about 10 minutes at least once a month to keep internal parts lubricated.
Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient.

The refrigerant specifications are indicated on a label attached to the inside of the engine compartment. If the wrong type of refrigerant is used, it could result in a serious malfunction of the air conditioner. Consult a professional, government certified repairer for the inspection or repair because a special device is required for the air conditioner maintenance.

For details, consult an expert repairer, we recommend an Authorised Mazda Repairer.

Vent Operation (Front)

Adjusting the Vents

Directing airflow

To adjust the direction of airflow, move the adjustment knob.

When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

The air vents can be fully opened and closed by operating the dial. (Side vents only)

Close Note

View Note

Side Vents

Centre Vents

Selecting the Airflow Mode

The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.

Close Note

View Note

Front Air Conditioner

Air-conditioning system information is displayed on the display.

Control Switches

AUTO switch

By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:

Airflow temperature
Amount of airflow
Selection of airflow mode
Outside/Recirculated air selection
Air conditioner operation
A/C or A/C ECO selection

AUTO switch indicator light

When on, it indicates auto operation, and the system will function automatically.
If any of the following switches are operated while in auto control, the AUTO switch indicator turns off.
- Mode selector switch
- Fan control switch
- Windscreen defroster switch
  
  The functions for switches other than those operated continue to operate in auto control.

Close Note

View Note

OFF switch

Pressing the OFF switch shuts off the air-conditioning system.

Temperature control dial

This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold.

When the DUAL switch is off:

Turn the driver temperature control dial to control the temperature throughout the entire cabin.
When the DUAL switch is on:

Turn the driver or front passenger temperature control dial to independently control the temperature on each side of the cabin.

The air-conditioning system changes to the individual operation mode (DUAL switch indicator light illuminated) by turning the front passenger temperature control dial even when the DUAL switch is off, which allows individual control of the set temperature for the driver and front passenger.
The temperature units for the temperature setting display can be changed in conjunction with the temperature units for the outside temperature display.

(Type A instrument cluster)

Refer to Outside Temperature Display (Search).

(Type B instrument cluster)

Refer to Outside Temperature Display (Without Multi-information Display) (Search).

Close Note

View Note

Fan control switch

The fan has seven speeds. The selected speed will be displayed.

Mode selector switch

The desired airflow mode can be selected (Search).

With the airflow mode set to the position and the temperature control dial set at a medium temperature, heated air is directed to the feet and air at a comparably lower temperature will flow through the central, left and right vents.
To set the air vent to , press the windscreen defroster switch.
In the position, the air conditioner is automatically turned on and the outside air position is automatically selected to defrost the windscreen.

Close Note

View Note

A/C switch

Pressing the A/C switch while the AUTO switch is turned on will turn off the air conditioner (cooling/dehumidifying functions).

The on/off of the air conditioner switches each time the A/C switch is pressed.

Changes as follows each time the A/C switch is pressed.

A/C→A/C ECO→Stop

The air conditioner operates when the A/C switch is pressed while the air conditioner is turned off.
The A/C ECO function is designed to economize use of the air-conditioning system. “A/C ECO” is displayed to indicate that the air-conditioning system is operating at optimum control.
The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Close Note

View Note

Air intake selector

Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.

Recirculated air position (indicator light illuminated)

Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.

Outside air position (indicator light turned off)

Outside air is allowed to enter the cabin. Use this mode for ventilation or windscreen defrosting.

Do not use the recirculated air position in cold or rainy weather:

Using the recirculated air position in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.

Close Warning

View Warning

DUAL switch

Use the DUAL switch to change the mode between the individual operation (driver and passenger) and interconnection (simultaneous) modes.

Individual operation mode (indicator light illuminated)

The set temperature can be controlled individually for the driver and front passenger.

Interconnection mode (indicator light turned off)

The set temperature for the driver and front passenger is controlled simultaneously.

Windscreen defroster switch

Press the switch to defrost the windscreen and front door windows.

Refer to Windscreen Defrosting and Defogging (Search).

Rear window defogger switch

Press the rear window defogger switch to defrost the rear window.

Refer to Rear Window Defogger (Search).

Operation of Automatic Air Conditioner

Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
Use the temperature control dial to select a desired temperature.

Press the DUAL switch or turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger.

To turn off the system, press the OFF switch.

Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.

Close Note

View Note

Windscreen Defrosting and Defogging

Press the windscreen defroster switch.

In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windscreen and side windows (Search).

Airflow amount will be increased.

Set the temperature control to the hot or warm position when defogging ( position):

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up. Your vision will be hampered, which could lead to a serious accident.

Close Warning

View Warning

Use the temperature control dial to increase the air flow temperature and defog the windscreen more quickly.

Close Note

View Note

Sunlight/Temperature Sensor

Sunlight sensor

Do not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly.

Interior temperature sensor

Do not cover the interior temperature sensor. Otherwise, the interior temperature may not adjust correctly.

Vent Operation (Rear)

Adjusting the Vents

Directing airflow

You can direct air flow by moving the adjustment knob.

When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

Close Note

View Note

Selecting the Airflow Mode

Rear Air Conditioner

Air-conditioning system information is displayed on the display.

Control Switches

Rear switch

Press the rear switch to operate the rear air conditioner.

The indicator illuminates to indicate that the rear air conditioner is operating.

AUTO switch

By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature:

Airflow temperature
Amount of airflow
Selection of airflow mode

OFF switch

Pressing the OFF switch shuts off the air-conditioning system.

Temperature control switch

This switch controls temperature. Press for hot and for cold.

Fan control switch

The fan has five speeds. The selected speed will be displayed.

Mode selector switch

The desired airflow mode can be selected. Refer to Selecting the Airflow Mode (Search).

Operation of Automatic Air Conditioner

Operation from front seats

Turn the front air conditioner on.
Press the rear switch. The rear air conditioner operates.
Selection of the airflow mode, airflow amount and temperature will be automatically controlled to the same temperature setting as the front air conditioner for the driver's side.
- If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
- Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
- When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
- When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver's side, “SYNC” is displayed on the rear screen.
Close Note

View Note

Operation from rear seats

Turn the front air conditioner on.
Press the AUTO switch. The selection of the airflow mode and airflow amount will be automatically controlled.
Use the temperature control switch to set the desired temperature.
- If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
- Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
- When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
- When the rear air conditioner is operated automatically, “AUTO” is displayed on the rear screen.
- When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver's side, “SYNC” is displayed on the rear screen.
Close Note

View Note

To turn off the system, press the OFF switch.