Specifications

Specifications

Engine

Item

Specification

Type

DOHC-16V in-line, 4-cylinder

Bore × Stroke

89.0 × 100 mm (3.50 × 3.94 in)

Displacement

2,488 ml (2,488 cc)

Compression ratio

10.5

 

Electrical System

Item

Classification

Battery

Q-85*1

Spark-plug number

Mazda Genuine spark plug*2

PY8V-18-110

  1. Q-85 is designed for i-stop system (FOR STOP & START)/i-ELOOP system. Only Q-85 should be used to ensure correct operation of i-stop system (FOR STOP & START)/i-ELOOP system. Consult an expert repairer, we recommend an Authorised Mazda Repairer for details.

  2. The spark plugs provide the SKYACTIV-G its optimum performance. Consult an expert repairer, we recommend an Authorised Mazda Repairer for details.

 

When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged.

Close Caution
View Caution

Lubricant Quality

Lubricant

Classification

Engine oil*1

API SM/SN or ILSAC GF-IV/GF-V

0W-30/5W-30/10W-30

Coolant

FL-22 type

Automatic transaxle fluid

Mazda Genuine special fluid (ATF FZ)

Transfer case oil

Mazda Long Life Hypoid Gear Oil SG1

Rear differential oil

Mazda Long Life Hypoid Gear Oil SG1

Brake fluid

SAE J1703 or FMVSS116 DOT-3

  1. Refer to Recommended Oil (Search).

Dimensions

Item

Vehicle specification

Overall length

5,075 mm (199.8 in)

Overall width

1,969 mm (77.5 in)

Overall height

1,747 mm (68.8 in)

Front tread

1,663 mm (65.5 in)

Rear tread

1,663 mm (65.5 in)

Wheelbase

2,930 mm (115.4 in)

Tyres

Tyre mark information

Choose the proper tyres for your vehicle using the following tyre mark information.

Speed symbol

Maximum permissible speed

Q

Up to 160 km/h (99 mph)

R

Up to 170 km/h (105 mph)

S

Up to 180 km/h (111 mph)

T

Up to 190 km/h (118 mph)

U

Up to 200 km/h (124 mph)

H

Up to 210 km/h (130 mph)

V

Up to 240 km/h (149 mph)

W

Up to 270 km/h (167 mph)

Y

Up to 300 km/h (186 mph)

ZR

Over 240 km/h (149 mph)

Tyre and inflation pressure

 

The tyres have been optimally matched with the chassis of your vehicle.

When replacing tyres, Mazda recommends that you replace tyres of the same type originally fitted to your vehicle. For details, contact an expert repairer, we recommend an Authorised Mazda Repairer.

Close Note
View Note

Check the tyre pressure label for tyre size and inflation pressure (Search).

Standard tyre

Tyre size

Inflation pressure

Front

Rear

255/60R18 108H

230 kPa (2.3 bar, 33 psi)

230 kPa (2.3 bar, 33 psi)

255/50R20 105V

230 kPa (2.3 bar, 33 psi)

230 kPa (2.3 bar, 33 psi)

 

Temporary spare tyre

Tyre size

Inflation pressure

185/80R17 99M

320 kPa (3.2 bar, 46 psi)

 

Wheel nut tightening torque

When installing a tyre, tighten the wheel nut to the following torque.

108―147 N·m (12―14 kgf·m, 80―108 ft·lbf)

Fuses

Refer to Fuses (Search).

Page top