Specifications
Specifications
Engine
|
Item |
Specification |
|---|---|
|
Type |
DOHC-16V in-line, 4-cylinder |
|
Bore × Stroke |
89.0 × 100 mm (3.50 × 3.94 in) |
|
Displacement |
2,488 ml (2,488 cc) |
|
Compression ratio |
10.5 |
Electrical System
|
Item |
Classification |
|
|---|---|---|
|
Battery |
Q-85*1 |
|
|
Spark-plug number |
Mazda Genuine spark plug*2 |
PY8V-18-110 |
-
Q-85 is designed for i-stop system (FOR STOP & START)/i-ELOOP system. Only Q-85 should be used to ensure correct operation of i-stop system (FOR STOP & START)/i-ELOOP system. Consult an expert repairer, we recommend an Authorised Mazda Repairer for details.
-
The spark plugs provide the SKYACTIV-G its optimum performance. Consult an expert repairer, we recommend an Authorised Mazda Repairer for details.
When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged.
Lubricant Quality
|
Lubricant |
Classification |
|---|---|
|
Engine oil*1 |
API SM/SN or ILSAC GF-IV/GF-V 0W-30/5W-30/10W-30 |
|
Coolant |
FL-22 type |
|
Automatic transaxle fluid |
Mazda Genuine special fluid (ATF FZ) |
|
Transfer case oil |
Mazda Long Life Hypoid Gear Oil SG1 |
|
Rear differential oil |
Mazda Long Life Hypoid Gear Oil SG1 |
|
Brake fluid |
SAE J1703 or FMVSS116 DOT-3 |
-
Refer to Recommended Oil (Search).
Capacities
(Approximate Quantities)
|
Item |
Capacity |
||
|---|---|---|---|
|
Engine oil |
With oil filter replacement |
4.8 L (5.1 US qt, 4.2 Imp qt) |
|
|
Without oil filter replacement |
4.6 L (4.9 US qt, 4.0 Imp qt) |
||
|
Coolant |
10.0 L (10.6 US qt, 8.80 Imp qt) |
||
|
Automatic transaxle fluid |
8.0 L (8.5 US qt, 7.0 Imp qt) |
||
|
Transfer case oil |
0.45 L (0.48 US qt, 0.40 Imp qt) |
||
|
Rear differential oil |
0.35 L (0.37 US qt, 0.31 Imp qt) |
||
|
Fuel tank |
2WD |
72.0 L (19.0 US gal, 15.8 Imp gal) |
|
|
4WD |
74.0 L (19.5 US gal, 16.3 Imp gal) |
||
Check oil and fluid levels with dipsticks or reservoir gauges.
Dimensions
|
Item |
Vehicle specification |
|---|---|
|
Overall length |
5,075 mm (199.8 in) |
|
Overall width |
1,969 mm (77.5 in) |
|
Overall height |
1,747 mm (68.8 in) |
|
Front tread |
1,663 mm (65.5 in) |
|
Rear tread |
1,663 mm (65.5 in) |
|
Wheelbase |
2,930 mm (115.4 in) |
Light Bulbs
Tyres
Tyre mark information
Choose the proper tyres for your vehicle using the following tyre mark information.
|
Speed symbol |
Maximum permissible speed |
|---|---|
|
Q |
Up to 160 km/h (99 mph) |
|
R |
Up to 170 km/h (105 mph) |
|
S |
Up to 180 km/h (111 mph) |
|
T |
Up to 190 km/h (118 mph) |
|
U |
Up to 200 km/h (124 mph) |
|
H |
Up to 210 km/h (130 mph) |
|
V |
Up to 240 km/h (149 mph) |
|
W |
Up to 270 km/h (167 mph) |
|
Y |
Up to 300 km/h (186 mph) |
|
ZR |
Over 240 km/h (149 mph) |
Tyre and inflation pressure
The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type originally fitted to your vehicle. For details, contact an expert repairer, we recommend an Authorised Mazda Repairer.
Check the tyre pressure label for tyre size and inflation pressure (Search).
Standard tyre
|
Tyre size |
Inflation pressure |
|
|---|---|---|
|
Front |
Rear |
|
|
255/60R18 108H |
230 kPa (2.3 bar, 33 psi) |
230 kPa (2.3 bar, 33 psi) |
|
255/50R20 105V |
230 kPa (2.3 bar, 33 psi) |
230 kPa (2.3 bar, 33 psi) |
Temporary spare tyre
|
Tyre size |
Inflation pressure |
|---|---|
|
185/80R17 99M |
320 kPa (3.2 bar, 46 psi) |
Wheel nut tightening torque
When installing a tyre, tighten the wheel nut to the following torque.
108―147 N·m (12―14 kgf·m, 80―108 ft·lbf)
Fuses
Refer to Fuses (Search).
Brakes
If you require information regarding the wear limit specification for the brake disc plates and the measurement method, please contact an expert repairer, we recommend an Authorised Mazda Repairer. The information is made freely available.
