Switches and Controls

Lighting Control

Headlights

Turn the headlight switch to turn the headlights and other exterior lights on or off.

When the lights are turned on, the lights-on indicator light in the instrument cluster turns on.

 

 


  • To prevent discharging the battery, do not leave the lights on while the engine is off unless safety requires them.

  • Headlights do not blind drivers approaching in the opposite direction no matter what side of the road you must drive your vehicle (left-hand or right-hand traffic). Therefore, it is not necessary to adjust the optical axis of the headlights when switching temporarily to driving on the opposite side of the road (left-hand or right-hand traffic).

Without auto-light control

 

Switch Position

Ignition Position

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

Headlights

Off

Off

Off

Off

On

Off

Running lights (Some Models)

On*1

Off

Off

Off

Off

Off

Tail lights

Position lights

Number plate lights

On*2

Off

On

On

On

On*3

  1. The lights are turned on while the vehicle is driven.

  2. When the running lights are turned on, the tail lights, and number plate lights turn on. The position lights does not turn on.

  3. The lights are turned on continuously if the ignition is switched from ON to any other position with the lights turned on. The lights are turned off when the driver's door is opened or 30 seconds have elapsed since the lights turned on.

With auto-light control

 

Switch Position

Ignition Position

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

Headlights

Off

Off

Auto*3

Off

Off

Off

On

Off

Running lights (Some Models)

On*1

Off

On*4

Off

Off

Off

Off

Off

Tail lights

Position lights

Number plate lights

On*2

Off

Auto*3

On*5

On

On

On

On*5

  1. The lights are turned on while the vehicle is driven.

  2. When the running lights are turned on, the tail lights, and number plate lights turn on. The position lights does not turn on.

  3. The lights are turned on by the auto light function.

  4. The lights are turned on while the vehicle is driven, and turned off when the headlights are turned on by the auto light function.

  5. The lights are turned on continuously if the ignition is switched from ON to any other position with the lights turned on. The lights are turned off when the driver's door is opened or 30 seconds have elapsed since the lights turned on.

Auto-light control (Some Models)

When the headlight switch is in the position and the ignition is switched ON, the light sensor senses the surrounding lightness or darkness and automatically turns the headlights and other exterior lights on or off.

 


  • Do not shade the light sensor by adhering a sticker or a label on the windscreen. Otherwise the light sensor will not operate correctly.

     

  • The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windscreen when the wiper lever is in the position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically. If you are going to clean the windscreen, be sure the wipers are turned off completely ― this is particularly important when clearing ice and snow ― when it is particularly tempting to leave the engine running.

 


  • The headlights and other exterior lights may not turn off immediately even if the surrounding area becomes well-lit because the light sensor determines that it is night time if the surrounding area is continuously dark for several minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking lots.

    In this case, the lights turn off if the light switch is turned to the position.

  • The sensitivity of the auto-light control may be changed.

    Refer to Personalisation Features (Search).

Headlight High-Low Beam

The headlights switch between high and low beams by moving the lever forward or backward.

 

When the headlight high-beams are on, the headlight high-beam indicator light is turned on.

 

Flashing the Headlights

Can be used when the ignition is switched ON.

To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on).

 

The headlight high-beam indicator light in the instrument cluster illuminates simultaneously. The lever will return to the normal position when released.

 

Coming Home Light

The coming home light turns on the headlights (low beams) when the lever is operated.

To turn on the lights

When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.

The headlights turn off after a certain period of time has elapsed after the doors are closed.

 


  • The time until the headlights turn off after all of the doors are closed can be changed.

    Refer to Personalisation Features (Search).

  • If no operations are done for 3 minutes after the lever is pulled, the headlights turn off.

  • The headlights turn off if the lever is pulled again while the headlights are illuminated.

Leaving Home Light

The leaving home light turns on the lights when the transmitter unlock button is pressed while away from the vehicle.

The following lights turn on when the leaving home light is operated.

Low beams, Position lights, Tail lights, Number plate lights.

To turn on the lights

When the ignition switch and the headlight switch are in the following conditions, the headlights will illuminate when the transmitter unlock button is pressed and the vehicle receives the transmitter signal. The headlights turn off after a certain period of time has elapsed (30 seconds).

  • Ignition switch: off

  • Headlight switch: , , or

 


  • Operation of the leaving home light can be turned on or off.

    Refer to Personalisation Features (Search).

  • When the transmitter lock button is pressed and the vehicle receives the transmitter signal, the headlights turn off.

  • When the headlight switch is turned to the position, the headlights turn off.

Headlight Levelling

The number of passengers and weight of cargo in the luggage compartment change the angle of the headlights.

 

The angle of the headlights will be automatically adjusted when turning on the headlights.

Running Lights

The running lights, which turn on while the vehicle is being driven during the daytime, are designed to notify on-coming vehicles or pedestrians of the presence of the vehicle.

 

Some countries require moving vehicles to have their lights on (running lights) during the daytime.

 

The running lights turn on when the vehicle is driven and turn off when the parking brake is operated or the selector lever is shifted to the P position.

 


The running lights can be deactivated.

Refer to Personalisation Features (Search).

Front Fog Lights (Some Models)

The front fog lights can be used when the ignition is switched ON.

Use this switch to turn on the front fog lights. The front fog lights will improve visibility at night and during foggy conditions.

 

To turn the front fog lights on, rotate the fog light switch to the position.

 

The headlight switch must be in the or position when turning on the front fog lights.

The front fog light indicator light in the instrument cluster illuminates while the front fog light are on.

 

To turn the front fog lights off, do any of the following:

  • Rotate the fog light switch to the position.

  • Turn the headlight switch to the position.

 


  • If the fog light switch is in the position or the headlight switch is in the position, the fog lights will turn on when the headlights, the exterior lights turn on.

  • When the fog light switch is rotated to the position while the headlights or the front fog lights are turned on (the fog light switch returns to the position automatically), the rear fog light turns on and the rear fog light indicator light turns on in the instrument cluster.