Air-Conditioning System
Vent Operation (Front)
Adjusting the Vents
Directing airflow
To adjust the direction of airflow, move the adjustment knob.
-
When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.
-
The air vents can be fully opened and closed by operating the dial. (Side vents only)
Side Vents
Centre Vents
Selecting the Airflow Mode
The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.
Front Air Conditioner
Air-conditioning system information is displayed on the display.
Operation of Automatic Air Conditioner
-
Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
-
Use the temperature control dial to select a desired temperature.
Turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger.
To turn off the system, press the power switch.
-
Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
-
When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
Windscreen Defrosting and Defogging
Press the windscreen defroster switch.
In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windscreen and side windows (Search).
Airflow amount will be increased.
Set the temperature control to the hot or warm position when defogging (
position):
Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up. Your vision will be hampered, which could lead to a serious accident.
Use the temperature control dial to increase the air flow temperature and defog the windscreen more quickly.
Sunlight/Temperature Sensor
Sunlight sensor
Do not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly.
Interior temperature sensor
Do not cover the interior temperature sensor. Otherwise, the interior temperature may not adjust correctly.
Vent Operation (Rear)
Adjusting the Vents
Directing airflow
You can direct air flow by moving the adjustment knob.
When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.
Selecting the Airflow Mode
Control Switches
Rear switch
Press the rear switch to operate the rear air conditioner.
The indicator illuminates to indicate that the rear air conditioner is operating.
AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature:
-
Airflow temperature
-
Amount of airflow
-
Selection of airflow mode
Power switch
The rear air-conditioning system turns on or off by pressing the power switch.
Temperature control switch
This switch controls temperature. Press 
for hot and 
for cold.
When the temperature control switch is set to the maximum or minimum, “Hi” or “Lo” is indicated on the display.
Fan control switch
The fan has five speeds. The selected speed will be displayed.
Mode selector switch
The desired airflow mode can be selected. Refer to Selecting the Airflow Mode (Search).
Operation of Automatic Air Conditioner
Operation from front seats
-
Turn the front air conditioner on.
-
Press the rear switch. The rear air conditioner operates.
-
Selection of the airflow mode, airflow amount and temperature will be automatically controlled to the same temperature setting as the front air conditioner for the driver's side.
-
If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
-
Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
-
When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
-
When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver's side, “SYNC” is displayed on the rear screen.
-
When operating the fan switch of the front air conditioner while the rear air conditioner is operating automatically, the airflow amount of the rear air conditioner may change.
-
Operation from rear seats
-
Turn the front air conditioner on.
-
Press the AUTO switch. The selection of the airflow mode and airflow amount will be automatically controlled.
-
Use the temperature control switch to set the desired temperature.
-
If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
-
Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
-
When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
-
When the rear air conditioner is operated automatically, “AUTO” is displayed on the rear screen.
-
When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver's side, “SYNC” is displayed on the rear screen.
-
To turn off the system, press the Power switch.
