Maintenance Monitor
-
Select the
icon on the home screen to display the Applications screen. -
Select “Vehicle Status Monitor”.
-
Select “Maintenance” to display the maintenance list screen.
-
Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
|
Tab |
Item |
Explanation |
|---|---|---|
|
Scheduled |
Setting |
Notification can be switched on/off. |
|
Time (months) |
Displays the time or distance until maintenance is due. Select this item to set the maintenance period. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile, or the remaining number of days is less than 15 (whichever comes first). |
|
|
Distance (mile or km) |
||
|
Reset |
Resets the time and distance to the initial values. Once the system turns on, it needs to be reset whenever carrying out maintenance. |
|
|
Tyre Rotation |
Setting |
Notification can be switched on/off. |
|
Distance (mile or km) |
Displays the distance until tyre rotation is due. Select this item to set the tyre rotation distance. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile. |
|
|
Reset |
Resets the remaining distance to the initial value. Once the system turns on, it needs to be reset whenever rotating the tyres. |
|
|
Oil Change |
Setting Interval |
Notification can be switched on/off. |
|
Distance (mile or km) |
Displays the distance until the oil replacement is due. Select this item to set the oil replacement distance. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile. |
|
|
Reset*1 |
In fixed setting Resets the remaining distance until oil replacement is due to the initial value. In addition, a vehicle engine control unit reset is required as follows: Press and hold the instrument panel illumination knob with the ignition switched OFF, then switch it ON. Keep pressing the instrument panel illumination knob for more than 7 seconds.  In OFF setting Press and hold the instrument panel illumination knob with the ignition switched OFF, then switch it ON. Keep pressing the instrument panel illumination knob for more than 7 seconds. |
|
-
Whenever the engine oil is replaced, the vehicle engine control unit reset is necessary.
