Appearance Care
Paint Damage Touch-up
Repair damage to the finish caused by stone chipping, damage during parking etc., by using Mazda touch-up paint before rust begins to form. First, remove the dirt and grease with a clean soft cloth.
If rust has already begun to form:
-
Remove rust completely with sandpaper.
-
Wipe with a clean soft cloth.
-
Apply rust preventive primer to the area.
-
After drying it completely, apply a suitable top coat material to the area.
Of course there will be no problem if you assign the work to an expert repairer, we recommend an Authorised Mazda Repairer.
Cavity Protection
Plastic Part Maintenance
Do not use polishing agents.
Depending on the product ingredients, they could cause discolouration, stains, cracks or peeling of the coating.
Instrument Panel Top Maintenance
-
Wipe the soiled area with a soft cloth soaked in a mild detergent (approx. 5%) diluted with water.
-
Wipe off the remaining detergent using a cloth soaked in clean water and wrung out well.
Panel Maintenance
If a panel becomes soiled, wipe it off with a soft cloth soaked in clean water and thoroughly wrung out.
If some areas require further cleaning, use the following procedure:
-
Wipe the soiled area with a soft cloth soaked in a mild detergent (approx. 5 %) diluted with water.
-
Wipe off the remaining detergent using a cloth soaked in clean water and wrung out well.
Be particularly careful when cleaning shiny surface panels and metallic parts such as plating as they can be scratched easily.
Active Driving Display Maintenance
The dust-proof sheet has a coating. When cleaning, do not use a hard or rough-surface cloth, or cleaning detergent. In addition, if a chemical solvent gets on the active driving display, wipe it off immediately. The dust-proof sheet could be damaged and the surface coating could be scratched. Use a fine, soft cloth such as those used for cleaning eyeglasses.
Cleaning the Window Interiors
If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container.
-
Do not scrape or scratch the inside of the window glass. It could damage the thermal filaments and the aerial lines.
-
When washing the inside of the window glass, use a soft cloth dampened in lukewarm water, gently wiping the thermal filaments and the aerial lines.
Use of glass cleaning products could damage the thermal filaments and the aerial lines.
Cleaning the Floor Mats
Rubber floor mats should be cleaned with mild soap and water only.
Do not use rubber cleaners, such as tyre cleaner or tyre shine, when cleaning rubber floor mats:
Cleaning the rubber floor mats with rubber cleaning products makes the floor mats slippery.
This may cause an accident when depressing the accelerator or brake pedal or when getting in or out of the vehicle.
After removing the floor mats for cleaning, always reinstall them securely (Search).