Lighting Control
Fog Lights (Some Models)
Turn and Lane-Change Signals
Windscreen Wipers and Washer
Rear Window Wiper and Washer (Some Models)
Rear Window Defogger
Horn
Hazard Warning Flasher

Headlights

Turn the headlight switch to turn the headlights, other exterior lights and instrument panel illumination on or off.

When the lights are turned on, the lights-on indicator light in the instrument cluster turns on.

 

 


  • To prevent discharging the battery, do not leave the lights on while the engine is off unless safety requires them.

Close Note
View Note

Without auto-light control

 

Switch Position

Ignition Position

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

Headlights

Off

Off

Off

Off

On

Off

Running lights (Some Models)

On

Off

Off

Off

Off

Off

Tail lights

Position lights

Number plate lights

Instrument panel illumination

Off

Off

On

On

On

On*1

  1. If the driver's door is opened or 30 s have elapsed with the lights turned on, the lights turn off.

With auto-light control

 

Switch Position

Ignition Position

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

ON

ACC or OFF

Headlights

Off

Off

Auto*1

Off

Off

Off

On

Off

Running lights (Some Models)

On

Off

Auto*1

Off

Off

Off

Off

Off

Tail lights

Position lights

Number plate lights

Instrument panel illumination

Off

Off

Auto*1

On*2/Off*3

On

On

On

On*4

  1. The headlight and other light settings switch automatically depending on the surrounding brightness detected by the sensor.

  2. While the lights are turned on, they will remain on even if the ignition is switched to a position other than ON.

    If the driver’s door is opened or 30 s have elapsed with the lights turned on, the lights turn off.

  3. When the ignition is switched to a position other than ON, the lights will not turn on even if the light switch is switched to .

  4. If the driver’s door is opened or 30 s have elapsed with the lights turned on, the lights turn off.

Auto-light control

When the headlight switch is in the position and the ignition is switched ON, the light sensor senses the surrounding lightness or darkness and automatically turns the headlights, other exterior lights and instrument panel illumination on or off (see chart above).

 


  • Do not shade the light sensor by adhering a sticker or a label on the windscreen. Otherwise the light sensor will not operate correctly.

     

  • The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windscreen when the wiper lever is in the position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically. If you are going to clean the windscreen, be sure the wipers are turned off completely ― this is particularly important when clearing ice and snow ― when it is particularly tempting to leave the engine running.

Close Caution
View Caution

 


  • The headlights, other exterior lights and instrument panel illumination may not turn off immediately even if the surrounding area becomes well-lit because the light sensor determines that it is night time if the surrounding area is continuously dark for several minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking lots.

    In this case, the lights turn off if the light switch is turned to the position.

  • When the headlight switch is in the position and the ignition is switched to ACC or the ignition is switched off, the headlights, other exterior lights and instrument panel illumination will turn off.

  • The instrument panel illumination can be adjusted by rotating the knob in the instrument cluster. Also, the antidazzle mode can be changed by rotating the knob until a beep sound is heard. To adjust the brightness of the instrument panel illumination: Refer to Instrument Panel Illumination (Search).

  • The sensitivity of the AUTO lights may be changed by an Authorised Mazda Repairer. Refer to Personalisation Features (Search).

Close Note
View Note