Read this first
Clock
Setting the time
The clock can be set at any time when the ignition is switched to ACC or ON.
-
To adjust the time, press the clock button (
) for about 2 seconds until a beep is heard.
-
The clock's current time will flash.
Time adjustment
-
To adjust the time, press the hour/minute set button (
, 
) while the clock's current time is flashing.
-
The hours advance while the hour set button (
) is pressed. The minutes advance while the minute set button () is pressed.
-
-
Press the clock button (
) again to start the clock.
Time resetting
-
Press the clock button (
) for about 2 seconds until a beep is heard.
-
Press the :00 button (1).
-
When the button is pressed, the time will be reset as follows:
(Example)
12:01―12:29→12:00
12:30―12:59→1:00
-
When the :00 button (1) is pressed, the seconds will start at “00”.
-
Switching between 12 and 24-hour clock time:
Press the menu button (
) several times until 12 and 24-hour clock time are displayed. Turn the audio control
dial in either direction, select the desired clock setting while the preferred clock
time is flashing.
