The ignition must be switched ON to use the turn and lane-change signals.
Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to flash after a turn, manually return the lever to its original position.
The direction indicators in the instrument cluster flash according to the operation of the direction indicator lever to show which signal is working.
If an indicator light stays on without flashing or if it flashes abnormally, one of the direction indicator bulbs may be burned out.
A personalised function is available to change the turn indicator sound volume. (Search)
Move the lever halfway toward the direction of the lane change―until the indicator flashes― and hold it there. It will return to the off position when released.
After releasing the direction indicator lever, the direction indicator flashes three times. The operation can be cancelled by moving the lever in the direction opposite to which it was operated.
The three-flash turn signal function can be switched to operable/inoperable using the personalisation function.
Refer to Personalisation Features (Search).