Cruise Control (Some Models)

With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph).

 


Do not use the cruise control under the following conditions:

Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

  • Hilly terrain

  • Steep inclines

  • Heavy or unsteady traffic

  • Slippery or winding roads

  • Similar restrictions that require inconsistent speed

Close Warning

Cruise Control Switch

 


If your Mazda has the following steering switch, your Mazda is equipped with the Mazda Radar Cruise Control (MRCC) system.

Refer to Mazda Radar Cruise Control (MRCC) (Search).

Close Note

Cruise Main Indication (White), Cruise Set Indication (White)/Indicator Light (Green)

Cruise main indication (white)

The cruise main indication (white) is displayed in the instrument cluster when the cruise control system is activated.

Cruise set indication (white)/indicator light (green)

The cruise set indication (white) is displayed in the instrument cluster and the cruise set indicator light (green) turns on when a cruising speed has been set.

Activation/Deactivation

With adjustable speed limiter

To activate the system, press the MODE switch. The cruise main indication (white) is displayed.

To deactivate the system, press the OFF/CAN switch.

The cruise main indication (white) turns off.

 


When the MODE switch is pressed while the cruise control system is operating, the cruise control system switches to the adjustable speed limiter.

Close Note

Without adjustable speed limiter

To activate the system, press the ON switch. The cruise main indication (white) is displayed.

To deactivate the system, press the OFF/CAN switch.

The cruise main indication (white) turns off.

 


Always turn off the cruise control system when it is not in use:

Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.

Close Warning

 


When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF with the cruise control system operable, the system will be operable when the ignition is switched ON the next time.

Close Note

To Set Speed

  1. (With adjustable speed limiter)

    Activate the cruise control system by pressing the MODE switch. The cruise main indication (white) is displayed.

    (Without adjustable speed limiter)

    Activate the cruise control system by pressing the ON switch. The cruise main indication (white) is displayed.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

  3. Set the cruise control by pressing the SET switch at the desired speed. The cruise control is set at the moment the SET switch is pressed. Release the accelerator pedal simultaneously. The cruise set indication (white) is displayed and the cruise set indicator light (green) turns on.

 


  • The cruise control speed setting cannot be performed under the following conditions:

    • (Automatic transaxle)

      The selector lever is in the P or N position.

    • (Manual transaxle)

      The shift lever is in the neutral position.

    • The parking brake is applied.

    • (Vehicles with adjustable speed limiter)

      The MODE switch for the adjustable speed limiter is pressed.

  • Release the SET or RES/ switch at the desired speed, otherwise the speed will continue increasing while the RES/ switch is pressed and held, and continue decreasing while the SET switch is pressed and held (except when the accelerator pedal is depressed).

  • On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while descending.

  • The cruise control will cancel if the vehicle speed decreases below 21 km/h (13 mph) when climbing a steep grade.

  • The cruise control may cancel at about 15 km/h (9 mph) below the preset speed such as when climbing a long, steep grade.

Close Note

To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

Press the RES/ switch and hold it. Your vehicle will accelerate. Release the switch at the desired speed.

 

Press the RES/ switch and release it immediately to adjust the preset speed. Multiple operations will increase the preset speed according to the number of times it is operated.

Increasing speed with a single RES/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)

Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To increase speed using accelerator pedal

Depress the accelerator pedal to accelerate to the desired speed. Press the SET switch and release it immediately.

 


Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.

Close Note

To Decrease Cruising Speed

Press the SET switch and hold it. The vehicle will gradually slow.

Release the switch at the desired speed.

 

Press the SET switch and release it immediately to adjust the preset speed. Multiple operations will decrease the preset speed according to the number of times it is operated.

Decreasing speed with a single SET switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)

Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To Resume Cruising Speed at More Than 25 km/h (16 mph)

If some other method besides the OFF/CAN switch was used to cancel cruising speed (such as applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RES/ switch is pressed.

If vehicle speed is below 25 km/h (16 mph), increase the vehicle speed up to 25 km/h (16 mph) or more and press the RES/ switch.

To Temporarily Cancel

To temporarily cancel the system, use one of these methods:

  • Slightly depress the brake pedal.

  • (Manual transaxle)

    Depress the clutch pedal.

  • Press the OFF/CAN switch.

If the RES/ switch is pressed when the vehicle speed is 25 km/h (16 mph) or higher, the system reverts to the previously set speed.

 


  • If any of the following conditions occur, the cruise control system is temporarily cancelled.

    • The parking brake is applied.

    • (Vehicles with adjustable speed limiter)

      The MODE switch for the adjustable speed limiter is pressed.

    • (Automatic transaxle)

      The selector lever is in the P or N position.

    • (Manual transaxle)

      The shift lever is in the neutral position.

  • When the cruise control system is temporarily cancelled by even one of the applicable cancel conditions, the speed cannot be re-set.

  • (Automatic transaxle)

    The cruise control cannot be cancelled while driving in manual mode (selector lever shifted from D to M position). Therefore, engine braking will not be applied even if the transaxle is shifted down to a lower gear. If deceleration is required, lower the set speed or depress the brake pedal.

Close Note

To Deactivate

When a cruising speed has been set (cruise set indication (white) is displayed/cruise set indicator light (green) turns on)

Long-press the OFF/CAN switch or press the OFF/CAN switch 2 times.

When a cruising speed has not been set (cruise main indication (white) is displayed)

Press the OFF/CAN switch.