i-ACTIVSENSE

The timing in which the system switches the headlights changes under the following conditions. If the system does not switch the headlights appropriately, manually switch between high and low beams according to the visibility as well as road and traffic conditions.

• When there are sources of light in the area such as street lamps, illuminated signboards, and traffic signals.

• When there are reflective objects in the surrounding area such as reflective plates and signs.

• When visibility is reduced under rain, snow and foggy conditions.

• When driving on roads with sharp turn or hilly terrain.

• When the headlights/rear lamps of vehicles in front of you or in the opposite lane are dim or not illuminated.

• When there is sufficient darkness such as at dawn or dusk.

• When the luggage compartment is loaded with heavy objects or the rear passenger seats are occupied.

• When visibility is reduced due to a vehicle in front of you spraying water from its tyres onto your windscreen.

The headlight high-beam indicator light turns on while the high beams are on.

Under the following conditions, the Adaptive LED Headlights (ALH) may not operate normally. Manually switch between the high and low beams according to the visibility, and the road and traffic conditions.

• When there are other sources of light in the area such as street lamps, illuminated signboards, and traffic signals.

• When there are reflective objects in the surrounding area such as reflective plates and signs.

• When visibility is reduced under rain, snow and foggy conditions.

• When driving on roads with sharp curves or undulations.

• When the headlights/rear lamps of vehicles ahead or in the opposite lane are dim or not illuminated.

• When there is insufficient darkness such as at dawn or dusk.

• When the luggage compartment is loaded with heavy objects or the rear passenger seats are occupied.

• When visibility is reduced due to a vehicle ahead spraying water from its tyres onto your windscreen.

• If your vehicle deviates from its traffic lane, the LDWS operates (warning sound and indicator light). Steer the vehicle adequately to drive the vehicle to the centre of the lane.

• When the direction indicator lever is operated for a lane change, the LDWS warning is automatically cancelled. The LDWS warning becomes operable when the direction indicator lever is returned and the system detects the white or yellow lines.

• If the steering wheel, accelerator pedal, or brake pedal is operated abruptly and the vehicle moves close to a white or yellow line, the system determines that the driver is making a lane change and the LDWS warning is automatically cancelled.

• The LDWS may not operate during the period immediately after the vehicle has deviated from its lane and the LDWS has operated, or the vehicle deviates from its lane repeatedly within a short period of time.

• The LDWS does not operate if it does not detect the white or yellow lines of the traffic lane.

• Under the following conditions, the LDWS may not be able to detect white or yellow lines correctly and the LDWS may not operate correctly.

  • If an object placed on the instrument panel is reflected in the windscreen and picked up by the camera.

  • Heavy luggage is loaded in the luggage compartment or on the rear seat and the vehicle is inclined.

  • The tyre pressures are not adjusted to the specified pressure.

  • When the vehicle is driven on the entry and exit to or from the rest area or tollgate of a highway.

  • The white or yellow lines are less visible because of dirt or paint flaking.

  • The vehicle ahead is running near a white or yellow line and the line is less visible.

  • A white or yellow line is less visible because of bad weather (rain, fog, or snow).

  • The vehicle is driven on a temporary lane or section with a closed lane due to construction.

  • A misleading line is picked up on the road such as a temporary line for construction, or because of shade, lingering snow, or grooves filled with water.

  • The surrounding brightness suddenly changes such as when entering or exiting a tunnel.

  • The illumination of the headlights is weakened because of dirt or the optical axis is deviated.

  • The windscreen is dirty or foggy.

  • Back-light is reflecting from the road surface.

  • The road surface is wet and shiny after rain, or there are puddles on the road.

  • The shade of a guardrail parallel to a white or yellow line is on the road.

  • The width of a lane is excessively narrow or wide.

  • The road is excessively uneven.

  • The vehicle is shaken after hitting a road bump.

  • There are two or more adjacent white or yellow lines.

  • There are various road markings or lane markings of various shapes near an intersection.

• The Distance Recognition Support System (DRSS) operates when all of the following conditions are met:

  • The ignition is switched ON.

  • The Distance Recognition Support System (DRSS) is on.

  • The selector lever is in a position other than reverse (R).

  • The vehicle speed is 30 km/h or faster (19 mph or faster).

• The objects which activate the system are 4-wheeled vehicles.

• The Distance Recognition Support System (DRSS) may also operate in the presence of motorcycles and bicycles.

• The Distance Recognition Support System (DRSS) system may not operate normally under the following conditions:

  • The Dynamic Stability Control (DSC) has a malfunction.

  • The vehicle ahead is travelling at an extremely slow speed.

• The system does not operate with the following objects:

  • Vehicles approaching in the opposite direction.

  • Stationary objects (stopped vehicles, obstructions)

• The Driver Attention Alert (DAA) operates when all of the following conditions are met.

  • The vehicle speed is about 65 to 140 km/h (41 to 86 mph).

  • The system detects white (yellow) lane lines.

  • The system has completed learning of the driver’s driving data.

• The Driver Attention Alert (DAA) does not operate under the following conditions.

  • The vehicle speed is less than about 65 km/h (41 mph).

  • The vehicle speed exceeds about 140 km/h (86 mph)

  • The vehicle is making a sharp turn.

  • The vehicle is changing lanes.

• The Driver Attention Alert (DAA) may not operate normally under the following conditions.

  • White (yellow) lane lines are less visible because of dirt or fading/patchiness.

  • The vehicle is jolted or swayed continuously by strong winds or rough roads.

  • The vehicle is driven aggressively.

  • When making frequent lane changes.

• The Driver Attention Alert (DAA) detects driver fatigue and decreased attentiveness based on the driving data when the vehicle is driven at about 65 to 140 km/h (41 to 86 mph) for about 20 minutes. The driving data will be reset under the following conditions.

  • The vehicle is stopped for 15 minutes or longer.

  • The vehicle is driven at less than about 65 km/h (41 mph) for about 30 minutes.

  • The ignition is switched off.

• After the Driver Attention Alert (DAA) has displayed the first message encouraging rest, it does not display the next one until 45 minutes have passed.

• In the following cases, the Blind Spot Monitoring (BSM) warning indication/warning light turns on and operation of the system is stopped. If the Blind Spot Monitoring (BSM) warning indication/warning light remains illuminated, have the vehicle inspected at an Authorised Mazda Dealer as soon as possible.

  • Some problem with the system including the Blind Spot Monitoring (BSM) warning indicator lights has occurred.

  • A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred.

  • There is a large accumulation of snow or ice on the rear bumper near a radar sensor (rear).

  • Driving on snow-covered roads for long periods.

  • The temperature near the radar sensors becomes extremely hot due to driving for long periods on slopes during the summer.

  • The battery voltage has decreased.

• Under the following conditions, the radar sensors (rear) cannot detect target objects or it may be difficult to detect them.

  • The vehicle speed when reversing is about 10 km/h (6 mph) or faster.

  • The radar sensor (rear) detection area is obstructed by a nearby wall or parked vehicle. (Reverse the vehicle to a position where the radar sensor detection area is no longer obstructed.)

    

  • A vehicle is approaching directly from the rear of your vehicle.

    

  • The vehicle is parked on a slant.

    

  • (With Blind Spot Monitoring (BSM) OFF switch)

    Directly after pressing the Blind Spot Monitoring (BSM) OFF switch and the system becomes operable.

    (Without Blind Spot Monitoring (BSM) OFF switch)

    Directly after the Blind Spot Monitoring (BSM) system becomes operable.

• In the following cases, it may be difficult to view the illumination/flashing of the Blind Spot Monitoring (BSM) warning indicator lights equipped on the door mirrors.

  • Snow or ice adheres to the door mirrors.

  • The front door glass is fogged or covered in snow, frost or dirt.

• Turn off the Rear Cross Traffic Alert (RCTA) system while pulling a trailer or while an accessory such as a bicycle carrier is installed to the rear of the vehicle. Otherwise, the radio waves emitted by the radar will be blocked causing the system to not operate normally.