Spare Tyre and Tool Storage
Emergency Flat Tyre Repair Kit (Some Models)
Changing a Flat Tyre (With Spare Tyre)

Jack (Some Models)

To remove the jack

(With spare tyre)

Saloon

  1. Lift the boot mat.

  2. Remove the boot board.

     

  3. Turn the wing bolt and jack screw anticlockwise.

     

Hatchback

  1. Remove the cover.

     

  2. Turn the wing bolt and jack screw anticlockwise.

     

(Without spare tyre)

  1. Lift the luggage compartment mat.

     

  2. Remove the jack.

To secure the jack

(With spare tyre)

  1. Insert the wing bolt into the jack with the jack screw pointing to the right (Saloon) or down (Hatchback) and turn the wing bolt clockwise to temporarily tighten it.

  2. Turn the jack screw in the direction shown in the figure.

    Saloon

    Hatchback

  3. Turn the wing bolt completely to secure the jack.

     


    If the jack is not completely secured, it could rattle while driving. Make sure the jack screw is sufficiently tightened.

    Close Note
    View Note
  4. Return the boot board to its original position (Saloon), or insert the cover tabs and install the cover (Hatchback).

     


    Verify that the cover is securely installed.

    Close Note
    View Note

(Without spare tyre)

Perform the removal procedure in reverse.

Maintenance

  • Always keep the jack clean.

  • Make sure the moving parts are kept free from dirt or rust.

  • Make sure the screw thread is adequately lubricated.