Scheduled Maintenance

Scheduled Maintenance

Scheduled Maintenance

 

After the prescribed period, continue to follow the described maintenance at the recommended intervals.

Close Note
View Note

Emission control and related systems

The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Do not tamper with them.

All inspections and adjustments must be made by an expert repairer, we recommend an Authorised Mazda Repairer.

Europe

My Mazda Service

My Mazda Service is the maintenance monitoring feature that alerts you of maintenance needs by turning on the wrench indicator light and/or displaying a specific message in the instrument panel.

In any case, every maintenance must be done within 20,000 km or 12 months at the latest after the previous maintenance, whichever of the three events (20,000 km, 12 months or display/wrench indication) occurs first.

Maintenance

1st

2nd

3rd

4th

5th

6th

7th

8th

9th

10th

11th

12th

Spark plugs*1

Replace every 120,000 km (75,000 miles).

Air filter*2

R

R

R

R

Fuel lines and hoses

I

I

I

I

I

I

Evaporative system (if installed)

I

I

I

I

Engine oil & filter*3*4

R

R

R

R

R

R

R

R

R

R

R

R

Drive belts*5

I

I

I

I

Cooling system

I

I

I

I

I

I

Engine coolant*6

Replace at first 200,000 km (125,000 miles) or 10 years; after that, every 100,000 km (62,500 miles) or 5 years.

Battery*7

I

I

I

I

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

I

I

I

I

Brake fluid*8

R

R

R

R

R

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

Drum brakes

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

Manual transaxle oil

Replace every 180,000 km (112,500 miles).

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

I

I

Exhaust system and heat shields

Inspect every 80,000 km (50,000 miles) or 5 years.

Bolts and nuts on chassis and body

T

T

T

T

T

T

Body condition (for rust, corrosion and perforation)

I

I

I

I

I

I

I

I

I

I

I

I

Cabin air filter (if installed)

R

R

R

R

R

R

Tyres (including spare tyre) (with inflation pressure adjustment)*9*10

I

I

I

I

I

I

I

I

I

I

I

I

Emergency flat tyre repair kit (if installed)*11

I

I

I

I

I

I

I

I

I

I

I

I

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

L: Lubricate

C: Clean

T: Tighten

D: Drain

Remarks:

  1. In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing them at the said interval.

    Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Latvia, Macedonia, Moldova, Montenegro, Romania, Serbia, Slovakia, Ukraine

  2. If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.

  3. Flexible setting is factory preset for some countries in Europe. Consult an Authorised Mazda Repairer for details. Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Driving in dusty conditions

    3. Extended periods of idling or low speed operation

    Once the flexible maintenance is selected, the vehicle calculates the remaining oil life based on engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.

    Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.

  4. If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km (6,250 miles) or shorter.

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Driving in dusty conditions

    3. Extended periods of idling or low speed operation

    4. Driving for long period in cold temperatures or driving regularly at short distance only

    5. Driving in extremely hot conditions

    6. Driving in mountainous conditions continually

  5. Also inspect the air conditioner drive belts, if installed.

    If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 20,000 km (12,500 miles) or 12 months.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

  6. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

  7. Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.

  8. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

  9. Tyre rotation is recommended every 10,000 km (6,250 miles).

  10. The Tyre Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).

  11. Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.

Maintenance Monitor

Maintenance Monitor (Type A audio)

“Oil Change” with flexible setting*1 is available. Consult an Authorised Mazda Repairer for details*2. When the engine oil flexible maintenance setting is selected, the wrench indicator light in the instrument cluster will be illuminated when remaining oil life becomes less than 1,000 km (600 mile), or remaining days are less than 15 (Whichever comes first).

Reset method

Press and hold the selector with the ignition switched off, then switch it on. Keep pressing the selector for more than 5 seconds. The master warning light will flash for a few seconds when the reset is completed.

  1. The engine oil flexible maintenance setting is available (only some models). Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining oil life.

  2. When the engine oil flexible maintenance setting is selected, the system must be reset whenever replacing the engine oil regardless of the wrench indicator light display.

Page top