Towing Hook-Front

  1. Remove the towing eyelet and the wheel brace from the luggage compartment (Search).

  2. Wrap a jack lever or similar tool with a soft cloth to prevent damage to a painted bumper, and open the cap located on the front bumper.

     

     

    Do not use excessive force as it may damage the cap or scratch the painted bumper surface.

    Close Caution
    View Caution

     

    Remove the cap completely and store it so as not to lose it.

    Close Note
    View Note

  3. Securely install the towing eyelet using the wheel brace.

     

  4. Hook the towing rope to the towing eyelet.

     

    If the towing eyelet is not securely tightened, it may loosen or disengage from the bumper when towing the vehicle. Make sure that the towing eyelet is securely tightened to the bumper.

    Close Caution
    View Caution

Page top