When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Multi-information Display (Some Models)

The multi-information display indicates the following information.

  • Odometer

  • Trip meter

  • Fuel gauge

  • Outside temperature

  • Distance-to-empty

  • Average fuel economy

  • Current fuel economy

  • Lane Departure Warning System (LDWS) Display

  • Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

  • Cruise Control Display

  • Warning message

The screen content changes each time the INFO switch is pressed.

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

 

If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible.

Refer to Taking Action (Search).

 

  • After refuelling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.

  • The display indicating a quarter or less remaining fuel has more segments to show the remaining fuel level in greater detail.

  • The direction of the arrow () indicates that the fuel-filler flap is on the left side of the vehicle.

Close Note

(SKYACTIV-D 1.5, SKYACTIV-D 2.2)

If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Outside Temperature Display

When the ignition is switched ON, the outside temperature is displayed.

 

 

  • Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:

    • Significantly cold or hot temperatures.

    • Sudden changes in outside temperature.

    • The vehicle is parked.

    • The vehicle is driven at low speeds.

Close Note

Changing the Temperature Unit of the Outside Temperature Display

The outside temperature unit can be switched between Celsius and Fahrenheit using the following procedure.

(Vehicles with Type C/D)

Settings can be changed by operating the centre display screen.

Refer to Personalisation Features (Search).

(Vehicles without Type C/D)

  1. Press the INFO switch with the ignition switched off and continue pressing the INFO switch for 5 seconds or longer while switching the ignition ON. The outside temperature display flashes.

  2. Press the INFO switch to change the outside temperature unit.

  3. Press and hold the INFO switch for 3 seconds or longer while the outside temperature display is flashing. The outside temperature display illuminates.

 

When the temperature unit indicated in the outside temperature display is changed, the temperature unit indicated in the engine coolant gauge display changes in conjunction with it.

Close Note

Outside Temperature Warning (Some Models)

When the outside temperature is low, the indication flashes and a beep sound is heard to warn the driver of the possibility of icy roads.

If the outside temperature is lower than about 4 °C (39 °F), the outside temperature display and the mark flashes for about ten seconds and a beep sound is heard once.

 

If the outside temperature is lower than -20 °C (-4 °F), the beep sound does not operate. However, the mark illuminates.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Distance-to-empty Mode

This displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

The distance-to-empty will be calculated and displayed every second.

 

 

  • Even though the distance-to-empty display may indicate a sufficient amount of remaining driving distance before refuelling is required , refuel as soon as possible if the fuel level is very low or the low fuel warning light illuminates.

  • The display will not change unless you add more than approximately 9 L (2.3 US gal, 1.9 Imp gal) of fuel.

  • The distance-to-empty is the approximate remaining distance the vehicle can be driven until all the graduation marks in the fuel gauge indicating the remaining fuel supply disappear.

  • If there is no past fuel economy information such as after first purchasing your vehicle or the information is deleted when the battery leads are disconnected, the actual distance-to empty/range may differ from the amount indicated.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Average Fuel Economy Mode

This mode displays the average fuel economy by calculating the total fuel consumption and the total travelled distance since purchasing the vehicle, re-connecting the battery after disconnection, or resetting the data.

The average fuel economy is calculated and displayed every minute.

 

To clear the data being displayed, press the INFO button for more than 1.5 seconds. After pressing the INFO button, - - - L/100 km (- - - mpg) will be displayed for about 1 minute before the fuel economy is recalculated and displayed.

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Current Fuel Economy Mode

This displays the current fuel economy by calculating the amount of fuel consumption and the distance travelled.

Current fuel economy will be calculated and displayed every two seconds.

 

When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

LDWS Display

Displays the currently set system status.

 

Refer to Lane Departure Warning System (LDWS) (Search).

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

Displays the system status.

 

Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) (Search).

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Cruise Control Set Vehicle Speed Display

The vehicle speed preset using the cruise control is displayed.

 

When DrivingInstrument Cluster and DisplayMulti-information Display (Some Models)

Warning (Display Indication)

A message is displayed to notify the user of the system operation status and malfunctions or abnormalities.

If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol. (Search)

When only a message is displayed, refer to Message Indicated in Multi-information Display. (Search)