i-ACTIVSENSE (Some Models)
Adaptive Front Lighting System (AFS) (Some Models)
Adaptive LED Headlights (ALH) (Some Models)
Lane Departure Warning System (LDWS) (Some Models)
Blind Spot Monitoring (BSM) (Some Models)
Traffic Sign Recognition System (TSR) (Some Models)
Distance Recognition Support System (DRSS) (Some Models)
Driver Attention Alert (DAA) (Some Models)
Rear Cross Traffic Alert (RCTA) (Some Models)
Mazda Radar Cruise Control (MRCC) (Some Models)
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) (Some Models)
Adjustable Speed Limiter (Some Models)
Advanced Smart City Brake Support (Advanced SCBS) (Except The Philippines, Taiwan) (Some Models)
Smart City Brake Support [Forward] (SCBS F) (The Philippines, Taiwan) (Some Models)
Smart City Brake Support [Reverse] (SCBS R)
Smart Brake Support (SBS) (Some Models)
Forward Sensing Camera (FSC) (Some Models)
Radar Sensor (Front) (Some Models)
Radar Sensors (Rear) (Some Models)
Ultrasonic Sensor (Rear)
When Drivingi-ACTIVSENSEAdjustable Speed Limiter (Some Models)

Setting the System

 

Always verify the safety of the surrounding area when setting the adjustable speed limiter:

If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the set speed. Verify the safety of the surrounding area and keep a safer distance between vehicles ahead and behind you.

Close Warning
View Warning

  1. Press the MODE switch to turn the system on.

  2. (With cruise control)

    Press the SET to set the speed. When the current vehicle speed is 30 km/h (20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).

    (With Mazda Radar Cruise Control (MRCC))

    Press the SET or SET to set the speed. When the current vehicle speed is 30 km/h (20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).

  3. (With cruise control)

    To increase the set speed, press the RES switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the RES switch momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the RES switch 4 times.

    (With Mazda Radar Cruise Control (MRCC))

    To increase the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the SET switch 4 times.

  4. To decrease the set speed, press the SET switch continuously. The set speed can be adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the SET switch momentary. For example, the set speed decreases about 4 km/h (4 mph) by pressing the SET switch 4 times.

 

  • With cruise control

    When the vehicle set speed is displayed in the instrument cluster, press the RES/ switch to set the displayed vehicle speed.

    With Mazda Radar Cruise Control (MRCC)

    When the vehicle set speed is displayed in the instrument cluster, press the RES switch to set the displayed vehicle speed.

  • The system is temporarily cancelled when the vehicle is accelerated by depressing the accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the set speed or less.

  • The vehicle speed may exceed the set speed on a down slope.

Close Note
View Note