Keys

• The headlights turn on/off by operating the transmitter. Refer to Leaving Home Light (Search).

• (With the advanced keyless function)

  A beep sound can be heard for confirmation when the doors and the liftgate/boot lid are locked/unlocked using the key. If you prefer, the beep sound can be turned off.

  The volume of the beep sound can also be changed.

  Refer to Personalisation Features (Search).

  Use the following procedure to change the setting.

  1. Switch the ignition off and close all of the doors and the liftgate/boot lid.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

     All of the doors and the liftgate/boot lid lock and the beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

  4. The setting change is completed by doing any one of the following:

     • Switching the ignition to ACC or ON.

     • Closing the driver's door.

     • Opening the liftgate/boot lid.

     • Not operating the key for 10 seconds.

     • Pressing any button except the LOCK button on the key.

     • Pressing a request switch.

• The doors and the liftgate/boot lid cannot be locked by pressing the lock button while any other door or the liftgate is open. The hazard warning lights will also not flash.

• Make sure all doors and the liftgate/boot lid are locked after pressing the button.

(Auto re-lock function)

After unlocking with the key, all doors and the liftgate/boot lid will automatically lock if any of the following operations are not performed within about 30 seconds.

The time required for the doors to lock automatically can be changed.

Refer to Personalisation Features (Search).

• A door or the liftgate/boot lid is opened.

• The ignition is switched to any position other than off.