Intelligent Speed Assistance (ISA) Display

The setting status of the ISA is displayed in the active driving display or the display in the instrument cluster.

Status

Indication on multi-information display/active driving display

Explanation

Stand-by display

Displays when the speed limiter switch is operated and the system is turned on.

Turns off when the system is turned off.

Setting display

Displays when the SET- or SET+ switch is operated and the speed is set.

Cancel display

Displays when any of the following operations is done and the system is temporarily cancelled.

  • CANCEL switch is operated

  • Accelerator pedal is strongly depressed

  • Any door is opened

  • The driver’s seat belt is unfastened

Warning display

If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or more, the ISA display flashes.

The display flashes until the vehicle speed decreases to the set speed or less.

A warning beep is activated at the same time as the warning display.

Refer to Speed Limiter Warning Beep (Search).

Page top