Security System

Theft-Deterrent System (Some Models)

How to Arm the System

  1. Close the windows and the sunroof (Some Models) securely.

     

    (With the intrusion sensor)

    Even with a window or the sunroof (Some Models) open, the system can be armed, however, leaving the windows or the sunroof (Some Models) even partially open can invite theft, and wind blowing into the vehicle could trigger the alarm.

    The intrusion sensor function can also be cancelled.

    Refer to Cancelling the Intrusion Sensor (With Intrusion Sensor) (Search).

    Close Note
    View Note

  2. Switch the ignition OFF.

  3. Make sure the bonnet, the doors, and the liftgate/boot lid are closed.

  4. Press the lock button on the transmitter.

    The hazard warning lights will flash once.

    (With the advanced keyless function)

    Touch the sensing area of the door lock touch sensor.

     

    The security indicator light in the instrument cluster flashes twice per second for 20 seconds.

     

  5. After 20 seconds, the system is fully armed.

     

    • The theft-deterrent system can also be armed by activating the auto relock function with all the doors, the liftgate/boot lid and the bonnet closed.

      Refer to Transmitter (Search).

    • The system will disarm if one of the following operations takes place within 20 seconds after pressing the lock button:

      • Unlocking any door.

      • Opening any door.

      • Opening the bonnet.

      • Switching the ignition ON.

      To rearm the system, do the arming procedure again.

    • When the doors are locked by pressing the lock button on the transmitter while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.

    Close Note
    View Note

To Turn Off an Armed System

An armed system can be turned off using any one of the following methods:

  • Pressing the unlock button on the transmitter.

  • Starting the engine with the push button start.

  • (With the advanced keyless function)

    • Touching the sensing area of the door release touch sensor.

The hazard warning lights will flash twice.

 

When the doors are unlocked by pressing the unlock button on the transmitter while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.

Close Note
View Note

Page top