To Set Speed

  1. Activate the cruise control system by pressing the cruise switch. The cruise standby indication (white) turns on.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

  3. Adjust the system to the desired vehicle speed using the accelerator pedal. Press the RES switch up (SET+) or down (SET-) to start cruise control. The cruise control indication (green) in the instrument cluster turns on at the same time. Quickly release the switch when the cruise control indication (green) turns on.

 

  • If the RES switch is operated up (SET+) or down (SET-) while the vehicle speed is between 25 km/h (16 mph) and 30 km/h (19 mph), the set speed is set to 30 km/h (19 mph).

  • The cruise control speed setting cannot be performed under the following conditions:

    • Any of the doors is opened.

    • The driver's seat belt is unfastened.

    • The brake pedal is depressed.

    • The parking brake is applied.

    • (Automatic transmission)

      The selector lever is in the P or N position.

    • (Manual transmission)

      The shift lever is in the neutral position.

  • On a steep grade, the vehicle may momentarily slow down while ascending or speed up while descending.

  • The cruise control will cancel if the vehicle speed decreases below 20 km/h (12 mph) when the cruise control is activated, such as when climbing a steep grade.

Close Note
View Note

The vehicle speed preset using the cruise control is displayed in the instrument cluster and the active driving display (vehicles with active driving display).

Instrument cluster (Basic display)

Instrument cluster (i-ACTIVSENSE display)

Active driving display

Page top