Setting the System
Always verify the safety of the surrounding area when setting the ASL:
If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the set speed. Verify the safety of the surrounding area and keep a safer distance between vehicles ahead and behind you.
-
Press the LIM switch to turn the system on.
-
Press the RES switch up (SET+) or down (SET-) to set the speed. When the current vehicle speed is 30 km/h (19 mph) or more, the speed is set to the current vehicle speed. When the current vehicle speed is less than 30 km/h (19 mph), the speed is set to 30 km/h (19 mph).
-
To increase the set speed, press the RES switch up (SET+) continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the RES switch up (SET+) momentary. For example, the set speed increases about 4 km/h (4 mph) by pressing the RES switch up (SET+) 4 times.
-
To decrease the set speed, press the RES down (SET-) continuously. The set speed can be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1 km/h (1 mph) increments by pressing the RES down (SET-) momentary. For example, the set speed decreases about 4 km/h (4 mph) by pressing the RES down (SET-) 4 times.
-
When the vehicle set speed is displayed in the instrument cluster, press the RES switch to set the displayed vehicle speed.
-
The system is temporarily cancelled when the vehicle is accelerated by depressing the accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the set speed or less.
-
The vehicle speed may exceed the set speed on a down slope.
-
In the following cases, the system cannot be set.
-
Any door is open.
-
The driver's seat belt is unfastened.
-
