Air-Conditioning System
Operating Tips
Operating Tips
-
Operate the air-conditioning system with the engine running.
-
To prevent the battery from being discharged, do not leave the fan control switch on for a long period of time with the ignition switched ON when the engine is not running.
-
(With i-stop)
The airflow amount may decrease slightly while the i-stop function is operating.
-
Clear all obstructions such as leaves, snow and ice from the bonnet and the air inlet in the cowl grille to improve the system efficiency.
-
Use the air-conditioning system to defog the windows and dehumidify the air.
-
The recirculate mode should be used when driving through tunnels or while in a traffic jam, or when you would like to shut off outside air for quick cooling of the interior.
-
Use the outside air position for ventilation or windscreen defrosting.
-
If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the air-conditioning system.
-
Run the air conditioner about 10 minutes at least once a month to keep internal parts lubricated.
-
Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient.
The refrigerant specifications are indicated on a label attached to the inside of the engine compartment. If the wrong type of refrigerant is used, it could result in a serious malfunction of the air conditioner. Consult a professional, government certified repairer for the inspection or repair because a special device is required for the air conditioner maintenance.
For details, consult an expert repairer, we recommend an Authorised Mazda Repairer.
-
Label
Vent Operation
Adjusting the Vents
Selecting the Airflow Mode
Instrument panel Vents
-
With rear vents
Defroster and Floor Vents
-
With rear vents
Instrument panel and Floor Vents
-
With rear vents
Defroster Vents
Floor Vents
-
With rear vents
The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.
Manual Type
Manual Type
-
A/C switch
-
Mode selector switch
-
Air intake selector switch
-
Fan control dial
-
Rear window defogger switch
-
Windscreen defroster switch
-
Temperature control dial
Control Switches
Temperature control dial
This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold.
Fan control dial
This dial allows variable fan speeds.
The fan has seven speeds.
Mode selector switches
The desired airflow mode can be selected (Search).
A/C switch
Press the A/C switch to turn the air conditioner on. The indicator light on the switch will illuminate when the fan control dial is in any position except OFF.
Press the switch once again to turn the air conditioner off.
The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).
Air intake selector switch
This switch controls the source of air entering the vehicle.
Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.
Recirculated air position (indicator light illuminated)
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position (indicator light turned off)
Outside air is allowed to enter the cabin. Use this mode for ventilation or windscreen defrosting.
Do not use the 
position (indicator light turns on) in cold or rainy weather:
Using the position (indicator light turns on) in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
Windscreen defroster switch
Press the switch to defrost the windscreen and front door windows.
Refer to Windscreen Defrosting and Defogging (Search).
Rear window defogger switch
Press the rear window defogger switch to defrost the rear window.
Refer to Rear Window Defogger (Search).
Heating
-
Press the
switch. -
Set the air intake selector to the outside air position (indicator light turns off).
-
Set the temperature control dial to the hot position.
-
Set the fan control dial to the desired speed.
-
If dehumidified heating is desired, turn on the air conditioner.
-
If the windscreen fogs up easily, press the
switch. -
If cooler air is desired at face level, press the
switch and adjust the temperature control dial to maintain maximum comfort. -
The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).
Cooling
-
Press the
switch. -
Set the temperature control dial to the cold position.
-
Set the fan control dial to the desired speed.
-
Turn on the air conditioner by pressing the A/C switch.
-
After cooling begins, adjust the fan control dial and temperature control dial as needed to maintain maximum comfort.
If the air conditioner is used while driving up long hills or in heavy traffic, monitor the high engine coolant temperature warning indication to see if it is displayed (Search).
The air conditioner may cause engine overheating. If the warning indication is displayed, turn the air conditioner off (Search).
-
When maximum cooling is desired, set the temperature control dial to the extreme cold position and set the air intake selector to the recirculated air position, then turn the fan control dial fully clockwise.
-
If warmer air is desired at floor level, press the
switch and adjust the temperature control dial to maintain maximum comfort. -
The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).
Ventilation
-
Press the
switch. -
Set the air intake selector to the outside air position (indicator light turns off).
-
Set the temperature control dial to the desired position.
-
Set the fan control dial to the desired speed.
Windscreen Defrosting and Defogging
-
Press the
switch. -
Set the temperature control dial to the desired position.
-
Set the fan control dial to the desired speed.
-
If dehumidified heating is desired, turn on the air conditioner.
Do not defog the windscreen using the switch with the temperature control set to the cold position:
Using the switch with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the switch.
-
Fogging on the windows clears up more easily while the air conditioner is on, but they will fog up more easily if the air conditioner is turned off.
-
Be careful that the windows do not fog up when doing any of the following:
-
Switching to recirculate mode
-
Turning off the air conditioner
-
-
For maximum defrosting, turn on the air conditioner, set the temperature control dial to the extreme hot position, and turn the fan control dial fully clockwise.
-
If warm air is desired at the floor, press the
switch. -
With the
switch, the outside air position is automatically selected to defrost the windscreen. The air intake selector cannot be changed to the recirculated air position.
Dehumidifying
Operate the air conditioner in cool or cold weather to help defog the windscreen and side windows.
-
Press the desired mode switch you want to set.
-
Set the air intake selector to the outside air position (indicator light turns off).
-
Set the temperature control dial to the desired position.
-
Set the fan control dial to the desired speed.
-
Turn on the air conditioner by pressing the A/C switch.
One of the functions of the air conditioner is dehumidifying the air and, to use this function, the temperature does not have to be set to cold. Therefore, set the temperature control dial to the desired position (hot or cold) and turn on the air conditioner when you want to dehumidify the cabin air.
Fully Automatic Type
Fully Automatic Type
Air-conditioning system information is displayed on the display.
-
Driver temperature control dial
-
AUTO switch
-
Temperature setting display (driver’s side)
-
Air intake display
-
Airflow display
-
Mode selector display
-
Temperature setting display (passenger’s side)
-
SYNC (synchronized temperature) switch
-
Passenger temperature control dial
-
A/C switch
-
Rear window defogger switch
-
Mode selector switch
-
Fan control switch
-
Air intake selector switch
-
Windscreen defroster switch
-
Power switch
Control Switches
AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:
-
Airflow temperature
-
Amount of airflow
-
Selection of airflow mode
-
Outside/Recirculated air selection
-
Air conditioner operation
-
Seat warmer level selection (Some Models)
-
Heated steering wheel operation (Some Models)
AUTO switch indicator light
-
When the AUTO switch indicator light is on, it indicates auto operation, and the system will function automatically.
-
If any of the following switches are operated while in auto control, the AUTO switch indicator turns off.
-
Mode selector switch
-
Fan control switch
-
Windscreen defroster switch
The functions for switches other than those operated continue to operate in auto control.
-
Power switch (System On/Off)
The air-conditioning system turns on or off by pressing the power switch.
Temperature control dial
This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold.
Turn the temperature control dial to adjust the temperature between 15 °C (60 °F) and 29 °C (84 °F).
-
When the SYNC switch is on:
Turn the driver temperature control dial to control the temperature throughout the entire cabin.
-
When the SYNC switch is off:
Turn the driver or front passenger temperature control dial to independently control the temperature on each side of the cabin.
-
The air-conditioning system changes to the individual operation mode (SYNC switch indicator light turns off) by turning the front passenger temperature control dial even when the SYNC switch is on, which allows individual control of the set temperature for the driver and front passenger.
-
When you set the temperature to the lower or upper limit, “Lo” or “Hi” is displayed.
-
The temperature units for the temperature setting display can be changed in conjunction with the temperature units for the outside temperature display.
Refer to Outside Temperature Display (Search).
Fan control switch
The fan has 7 speeds. The selected speed will be displayed.
Mode selector switch
The desired airflow mode can be selected (Search).
-
With the airflow mode set to the
position and the temperature control dial set at a medium temperature, heated air is directed to the feet and air at a comparably lower temperature will flow through the central, left and right vents. -
To set the air vent to
, press the windscreen defroster switch. -
In the
position, the outside air position is automatically selected.
A/C switch
Pressing the A/C switch while the AUTO switch is turned on will turn off the air conditioner (cooling/dehumidifying functions).
The on/off of the air conditioner switches each time the A/C switch is pressed.
-
The air conditioner operates when the A/C switch is pressed while the air conditioner is turned off.
-
The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).
Air intake selector switch
Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.
Recirculated air position ()
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position (
)
Outside air is allowed to enter the cabin. Use this mode for ventilation or windscreen defrosting.
Do not recirculate the air in the cabin during cold or rainy weather:
Recirculating the air in the cabin during cold and rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
SYNC (Synchronized Temperature) switch
Use the SYNC switch to change the mode between the individual operation (driver and passenger) and interconnection (simultaneous) modes.
Interconnection mode (indicator light turns on)
The set temperature for the driver and front passenger is controlled simultaneously.
Individual operation mode (indicator light turns off)
The set temperature can be controlled individually for the driver and front passenger.
Windscreen defroster switch
Press the switch to defrost the windscreen and front door windows.
Refer to Windscreen Defrosting and Defogging (Search).
Rear window defogger switch
Press the rear window defogger switch to defrost the rear window.
Refer to Rear Window Defogger (Search).
Operation of Automatic Air Conditioner
-
Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
-
Use the temperature control dial to select a desired temperature.
If you want to set the temperature on the front passenger's side separately from the driver's side, turn the front passenger temperature control dial to switch the mode automatically to the individual operation mode and set the temperature for the front passenger's side.
To turn off the system, press the power switch.
-
Set the control dial to the recommended temperature of 22 °C (72 °F), and then adjust it as desired.
-
Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
-
When selecting heat, the system will restrict airflow until the engine has warmed to prevent cold air from blowing out of the vents.
Windscreen Defrosting and Defogging
Press the windscreen defroster switch.
In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windscreen and side windows (Search).
Airflow amount will be increased.
Set the temperature control to the hot or warm position when defogging ( position):
Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up. Your vision will be hampered, which could lead to a serious accident.
-
Fogging on the windows clears up more easily while the air conditioner is on, but they will fog up more easily if the air conditioner is turned off.
-
Be careful that the windows do not fog up when doing any of the following:
-
Switching to recirculate mode
-
Turning off the air conditioner
-
-
Use the temperature control dial to increase the air flow temperature and defog the windscreen more quickly.
Sunlight/Temperature Sensor
The air-conditioning system measures inside and outside temperatures, humidity and sunlight using the sunlight/temperature sensor. It sets temperatures inside the cabin accordingly.
Do not obstruct both sensors, otherwise the air-conditioning system will not operate properly.
Sunlight sensor
-
Sunlight sensor
Interior temperature sensor
-
Interior temperature sensor
