Cruise Control
Cruise Control (Some Models)
Cruise Control
With cruise control, you can set and automatically maintain any speed of more than about 30 km/h (19 mph).
Do not use the cruise control under the following conditions:
Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.
-
Hilly terrain
-
Steep inclines
-
Heavy or unsteady traffic
-
Slippery or winding roads
-
Similar restrictions that require inconsistent speed
Cruise Control Switch
-
CANCEL switch
-
RES switch
-
Cruise switch
If your Mazda has the following steering switch, your Mazda is equipped with the Mazda Radar Cruise Control (MRCC) system, the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.
Refer to Mazda Radar Cruise Control (MRCC) (Search).
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).
If the Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is set to inoperable using the personalisation feature, the system switches to the cruise control function. In this case, the MRCC functions as the cruise switch. In addition, this personalisation feature setting is initialized by switching the ignition OFF, and it turns back on when the ignition is switched ON the next time.
Cruise Standby Indication (White)/Cruise Set Indication (Green)
Cruise standby Indication (White)
The indication turns on (white) when the cruise control system is activated.
Cruise Set Indication (Green)
The indication turns on (green) when a cruising speed has been set.
Activation/Deactivation
Always turn off the cruise control system when it is not in use:
Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.
When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF with the cruise control system operable, the system will be operable when the ignition is switched ON the next time.
Activation
To activate the system, press the cruise switch. The cruise standby indication (white) turns on.
Deactivation
To deactivate the system, press the cruise switch again.
The cruise standby indication (white) turns off.
To Set Speed
-
Activate the cruise control system by pressing the cruise switch. The cruise standby indication (white) turns on.
-
Accelerate to the desired speed, which must be more than 25 km/h (16 mph).
-
Adjust the system to the desired vehicle speed using the accelerator pedal. Press the RES switch up (SET+) or down (SET-) to start cruise control. The cruise control indication (green) in the instrument cluster turns on at the same time. Quickly release the switch when the cruise control indication (green) turns on.
-
If the RES switch is operated up (SET+) or down (SET-) while the vehicle speed is between 25 km/h (16 mph) and 30 km/h (19 mph), the set speed is set to 30 km/h (19 mph).
-
The cruise control speed setting cannot be performed under the following conditions:
-
Any of the doors is opened.
-
The driver's seat belt is unfastened.
-
The brake pedal is depressed.
-
The parking brake is applied.
-
(Automatic transmission)
The selector lever is in the P, N, or R position.
-
(Manual transmission)
The shift lever is in the neutral position.
-
-
On a steep grade, the vehicle may momentarily slow down while ascending or speed up while descending.
-
The cruise control will cancel if the vehicle speed decreases below 20 km/h (12 mph) when the cruise control is activated, such as when climbing a steep grade.
The vehicle speed preset using the cruise control is displayed in the instrument cluster and the active driving display (vehicles with active driving display).
Instrument cluster (Basic display)
Instrument cluster (i-ACTIVSENSE display)
Active driving display
Changing the Set Vehicle Speed
Follow either of these procedures.
To increase/decrease speed using cruise control switch
When the RES switch is pressed up (SET+), the vehicle accelerates and when the RES switch is pressed down (SET-), it decelerates.
-
Press and release immediately: 1 km/h (1 mph)
-
Press and hold: 10 km/h (5 mph)
Even after releasing the RES switch, the cruise control accelerates/decelerates continuously until the set speed displayed in the instrument cluster and on the active driving display is reached. If you want to stop accelerating/decelerating, change the set speed or cancel the system (such as by depressing the brake pedal).
To increase speed using accelerator pedal
Depress the accelerator pedal and press the RES switch up (SET+) or down (SET-) at the desired speed. If the switch is not operated, the system returns to the set speed after you release your foot from the accelerator pedal.
Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.
To Resume Cruising Speed at More Than 30 km/h (19 mph)
If the cruise control system is temporarily cancelled (such as by applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RES switch is pressed.
If vehicle speed is below 30 km/h (19 mph), increase the vehicle speed up to 30 km/h (19 mph) or more and press the RES switch.
To Temporarily Cancel
To Deactivate
Press the cruise switch again.
