Seat Warmer/Heated Steering Wheel
Seat Belt Systems
Seat Belt Warning Systems
Seat Belt Pretensioner and Load Limiting Systems
Child-Restraint System Installation
Advanced Keyless Entry System
Doors and Locks
Fuel and Emission
Mirrors
Windows
Security System
Driving Tips
Saving Fuel and Protection of the Environment
Hazardous Driving
Floor Mat
Rocking the Vehicle
Winter Driving
Driving In Flooded Area
Starting the Engine
i-stop
Manual Transmission Operation
Automatic Transmission
Shift-Lock System
Transmission Ranges
Manual Shift Mode
Driving Tips
Rear Window Wiper and Washer (Some Models)
Horn
Hazard Warning Flasher
ABS/TCS/DSC
M Hybrid
Drive Selection
Power Steering
i-ACTIVSENSE
Driver Attention Alert (DAA)
Front Radar Sensor
Front Side Radar Sensor (Some Models)
Rear Side Radar Sensor
Rear/Rear corner/Rear Side Ultrasonic Sensor (Some Models)
Driver Monitoring Camera (Some Models)
Tyre Pressure Monitoring System
Petrol Particulate Filter
Rear View Monitor
Parking Sensor System
Mazda Connect
Interior Equipment
Scheduled Maintenance
Owner Maintenance
Bonnet
Engine Compartment Overview
Engine Oil
Engine Coolant
Brake/Clutch Fluid
Window Washer Fluid
Body Lubrication
Wiper Blades
Tyres
Fuses
Emission Control Maintenance (Australia)
Flat Tyre
Battery Runs Out
Emergency Starting
Overheating
Emergency Towing
Warning/Indicator Lights and Warning Sounds
Warning Sound is Activated
Active Driving Display Does Not Operate
Windscreen Wipers Operate at High Speed
Cell Phones
Recording of Vehicle Data
Declaration of Conformity
Always turn off the cruise control system when it is not in use:
Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.
When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF with the cruise control system operable, the system will be operable when the ignition is switched ON the next time.
Activation
To activate the system, press the MRCCcruise switch. The cruise standby indication (white) turns on.
Deactivation
To deactivate the system, press the MRCC switch again.
The cruise standby indication (white) turns off.
Page top
