Wrench Indication/Indicator Light

The wrench indication/indicator light is displayed/turns on under the following conditions.

  • When the preset maintenance period has arrived.

    Refer to the Information section in the Mazda Connect Owner's Manual.

     

    • When the maintenance period arrives, have your vehicle inspected by an expert repairer (we recommend an Authorised Mazda Repairer) as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.

    • If the vehicle continues to be driven after the engine oil replacement period has passed, it could cause damage to the engine. Replace the engine oil before the maintenance period arrives.

    • (SKYACTIV-D 1.8)

      Depending on the vehicle use conditions, engine oil replacement is required due to engine oil deterioration from fuel penetrating the engine oil. If “Excessive Oil Level. Have the Vehicle Inspected” is displayed on the multi-information display in the instrument cluster, have your vehicle inspected at an expert repairer (we recommend an Authorised Mazda Repairer).

    Close Caution
    View Caution

  • (SKYACTIV-D 1.8)

    • When fuel filter (sedimentor) draining is required. Consult an expert repairer (we recommend an Authorised Mazda Repairer).

 

  • The wrench indication/indicator light may display/turn on earlier than the preset period depending on vehicle usage conditions.

  • Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.

    Refer to the Information section in the Mazda Connect Owner's Manual.

Close Note
View Note

 

Page top