Table 3

Vehicles utilizing the vehicle status monitor feature:

The vehicle status monitor feature alerts you of maintenance needs by turning on the wrench indicator light or displaying a message in the instrument panel, or both.

Every maintenance must be done when the display/wrench indication comes on. The display/wrench indication will come on before reaching the maximum interval.

 

Maximum interval 15,000 km or 12 months, whichever comes first

 

Manually set Next Service Distance of Vehicle Status Monitor to 10,000 km or shorter if the vehicle is driven primarily under any of the following conditions:

Refer to the Information section in the Mazda Connect Owner's Manual about the manual setting procedure.

  1. The vehicle is idled for long periods or driven at low speeds, such as with police cars, taxis, or driver's education school car.

  2. Driving under dusty conditions.

  3. Driving for long periods in cold temperatures or driving regularly for short distances only.

  4. Driving under extremely high temperature conditions.

  5. Driving continuously in mountainous regions.

Maintenance Item

1st

2nd

3rd

4th

5th

6th

7th

8th

9th

10th

11th

12th

Engine oil & oil filter *1

R

R

R

R

R

R

R

R

R

R

R

R

Drive belts *2

I

I

I

I

I

I

I

I

I

I

I

I

Engine coolant level

I

I

I

I

I

I

I

I

I

I

I

I

Battery *3*4

I

I

I

I

I

I

I

I

I

I

I

I

Vacuum brake booster and hose

With vacuum booster

I

I

I

I

I

I

I

I

I

I

I

I

Brake and clutch fluid level

I

I

I

I

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

Bolts and nuts on chassis and body

T

T

T

T

T

T

T

T

T

T

T

T

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

I

I

I

I

I

I

Body condition (for rust, corrosion and perforation)

I

I

I

I

I

I

I

I

I

I

I

I

Tyre inflation pressure and tyre wear *5*6

I

I

I

I

I

I

I

I

I

I

I

I

Emergency flat tyre repair kit (if equipped)*7

I

I

I

I

I

I

I

I

I

I

I

I

Fuel lines and hoses

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

Brake fluid *8

R

R

R

R

R

R

Cabin air filter (if equipped)

R

R

R

R

R

R

Hoses and tubes for emission

I

I

I

Driveshaft dust boots

I

I

I

I

Air filter *9

R

R

R

Exhaust system and heat shields

I

I

Manual transmission oil

Replace every 100,000 km or 5 years.

Spark plugs

SKYACTIV-G 1.5/SKYACTIV-G 2.0

Replace every 120,000 km.

SKYACTIV-X 2.0

Replace every 64,000 km.

Fuel filter

Replace every 135,000 km.

Engine coolant *10

Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

T: Tighten

R: Replace

Remarks:

  1. Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.

  2. Also inspect the air conditioner drive belts, if equipped.

    If the vehicle is driven primarily under any of the following conditions, inspect the drive belts at every 10,000 km or shorter.

    1. Driving for long period in extremely wet or heavy rain condition.

  3. Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.

  4. Inspection is only subjected for lead-acid battery.

  5. Tyre rotation is recommended every 15,000 km.

  6. Inspect a spare tyre if equipped.

  7. Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.

  8. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is driven in extremely humid climates, replace the brake fluid annually.

  9. If the vehicle is driven in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.

  10. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

Page top