Test Mode

The test mode function makes sure that the Mazda ERA-GLONASS can operate normally.

Have your vehicle tested at an Authorised Mazda Repairer when performing the test mode.

Method to start test mode

Switch the ignition ON while the parking brake is applied, and wait 2 minutes with the vehicle stopped.

After that, perform the following procedure.

After the procedure is completed, the test mode is performed in the following order automatically.

  1. Procedure is completed

  2. Switch to test mode

  3. Call is placed to call centre

  4. Vehicle information is sent

  5. Start of voice call

  6. Voice guidance from the call centre is played

 

Communication with the call centre may fail if the reception is poor. Perform the test mode in a location with good reception.

Close Note
View Note

The test mode finishes automatically.

Page top