Switches and Controls

• Turn the headlight switch to turn the headlights, other exterior lights and instrument panel illumination on or off.

• For vehicles with the type A instrument cluster, check the vehicle condition or have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer according to the indication.

• A system malfunction or operation conditions are indicated by a warning.

  Refer to Warning/Indicator Lights (Search).

 

---

• To prevent discharging the battery, do not leave the lights on while the engine is off unless safety requires them.

• Headlights are equipped which do not blind drivers approaching in the opposite direction no matter what side of the road you must drive your vehicle (left-hand or right-hand traffic). Therefore, it is not necessary to adjust the optical axis of the headlights when switching temporarily to driving on the opposite side of the road (left-hand or right-hand traffic).

Close Note

View Note

Without auto-light control

Switch Position
Ignition Position	ON	ACC or OFF	ON	ACC or OFF	ON	ACC or OFF
Headlights	―	―	―	―	×	―
Running lights (Some Models)	×*1	―	―	―	―	―
Tail lights Position lights Number plate lights Instrument panel illumination	―	―	×	×	×	―/×*2

×: On

―: Off

1. It turns on while driving the vehicle.

2. While the lights are turned on, they will remain on even if the ignition is switched to a position other than ON.

   If the driver's door is opened or 30 s have elapsed with the lights turned on, the lights turn off.

With auto-light control

Switch Position
Ignition Position	ON	ACC or OFF	ON	ACC or OFF	ON	ACC or OFF	ON	ACC or OFF
Headlights	―	―	Auto*1	―	―	―	×	―
Running lights (Some Models)	×*2	―	Auto*1	―	―	―	―	―
Tail lights Position lights Number plate lights Instrument panel illumination	―	―	Auto*1	―/×*3	×	×	×	―/×*3

×: On

―: Off

1. The headlight and other light settings switch automatically depending on the surrounding brightness detected by the sensor.

2. It turns on while driving the vehicle.

3. While the lights are turned on, they will remain on even if the ignition is switched to a position other than ON.

   If the driver's door is opened or 30 s have elapsed with the lights turned on, the lights turn off.

Auto-light control

When the headlight switch is in the position and the ignition is switched ON, the light sensor senses the surrounding lightness or darkness and automatically turns the headlights, other exterior lights and instrument panel illumination on or off (see chart above).

 

---

• Do not shade the light sensor by adhering a sticker or a label on the windscreen. Otherwise the light sensor will not operate correctly.

  

• The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windscreen when the wiper lever is in the position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically. If you are going to clean the windscreen, be sure the wipers are turned off completely ― this is particularly important when clearing ice and snow ― when it is particularly tempting to leave the engine running.

Close Caution

View Caution

 

---

• The headlights, other exterior lights and instrument panel illumination may not turn off immediately even if the surrounding area becomes well-lit because the light sensor determines that it is nighttime if the surrounding area is continuously dark for several minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking lots.

  In this case, the lights turn off if the light switch is turned to the position.

• The instrument panel illumination can be adjusted by rotating the knob in the instrument cluster. Also, the antidazzle mode can be changed by rotating the knob until a beep sound is heard. To adjust the brightness of the instrument panel illumination:

  Refer to Instrument Panel Illumination (Search).

• The sensitivity of the AUTO lights may be changed.

  Refer to Personalisation Features (Search).

Close Note

View Note

Can be used when the ignition is switched ON.

To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on). The headlight high-beam indicator light in the instrument cluster illuminates simultaneously. The lever will return to the normal position when released.

The coming home light system turns on the headlights (low beams) when the lever is operated.

To turn on the system

When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.

The headlights turn off after a certain period of time has elapsed after the doors are closed.

 

---

• The time until the headlights turn off after all of the doors are closed can be changed.

  Refer to Personalisation Features (Search).

• If no operations are done for 3 minutes after the lever is pulled, the headlights turn off.

• The headlights turn off if the lever is pulled again while the headlights are illuminated.

Close Note

View Note

Some countries require moving vehicles to have their lights on (running lights) during the daytime.

The running lights turn on automatically when the vehicle starts moving.

They turn off when the parking brake is operated or the selector lever is shifted to the P position (automatic transaxle vehicle).

 

---

(Except countries prohibited by law)

The running lights can be deactivated.

Refer to Personalisation Features (Search).

Close Note

View Note

To turn the front fog lights on, rotate the fog light switch to the or position (the fog light switch returns to the position automatically).

The headlight switch must be in the or position before turning on the front fog lights.

The front fog light indicator light in the instrument cluster illuminates while the front fog lights are on.

To turn the front fog lights off, rotate the fog light switch to the position or turn the headlight switch to the position.

The front fog light indicator light in the instrument cluster turns off when the front fog lights are turned off.

 

---

• (With auto-light control)

  If the fog light switch is in the or position and the headlight switch is in the position, the front fog lights will turn on when the headlights, the exterior lights and instrument panel illumination turn on.

• If the fog light switch is rotated to the position (the fog light switch returns to the position automatically), the rear fog light will also illuminate, and the rear fog light indicator light in the instrument cluster will also illuminate.

Close Note

View Note

To turn the fog lights on, rotate the fog light switch to the position.

The headlight switch must be in the or position before turning on the fog lights.

The front fog light indicator light in the instrument cluster illuminates while the fog lights are on.

To turn the fog lights off, rotate the fog light switch to the position or turn the headlight switch to the position.

The front fog light indicator light in the instrument cluster turns off when the fog lights are turned off.

 

---

• (With auto-light control)

  If the fog light switch is in the position and the headlight switch is in the position, the fog lights will turn on when the headlights, the exterior lights and instrument panel illumination turn on.

Close Note

View Note